Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 92 by 25 millimetre case fan with four pin connector

Zyvpee

Zyvpee PF92251B1-0000-S99 92x25mm 12V 4.7W 4 Pin Ball Bearing Case Fan

SKU CH-4E2V-433CX

92 mm ball-bearing case fan drawing 4.7 W at 12 V with a 4-pin PWM connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector4 Pin
  • ColorBlack
  • LEDNon-LED
  • 12 V 4.7 W power draw for efficient cooling
  • 4-pin PWM connector enables precise speed control
  • Ball bearing design extends operational lifespan
  • 92 x 25 mm frame fits standard case mounts
  • Non-LED black finish suits any build aesthetic

92 mm ball-bearing case fan

The Zyvpee PF92251B1-0000-S99 is a 92 by 25 millimetre case fan with a 4‑pin connector and ball bearing. It runs on 12 volts and draws 4.7 watts, making it a direct replacement for compatible chassis or heatsink mounts. The black frame has no LED lighting.

Fits 92 mm mounting holes only

Builders with 92 millimetre fan positions and a 4‑pin header can use this unit. It is not for cases that only accept larger frame sizes. It is not for setups that need addressable RGB or PWM control beyond the standard 4‑wire interface. It is not for liquid‑cooling radiators that demand higher static pressure than a standard case fan provides.

4‑pin connector and ball bearing

The 4‑pin power connector enables motherboard speed control and monitoring. The ball bearing is rated for continuous operation at the stated voltage and power. Verify that your chassis has 92 by 25 millimetre clearance and a 4‑pin header before ordering.

Přednosti

  • 12 V 4.7 W power draw for efficient cooling
  • 4-pin PWM connector enables precise speed control
  • Ball bearing design extends operational lifespan
  • 92 x 25 mm frame fits standard case mounts
  • Non-LED black finish suits any build aesthetic

Specifikace

BrandZyvpee
SeriesPF92251B1-0000-S99
ModelPF92251B1-0000-S99
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector4 Pin
ColorBlack
LEDNon-LED
FeaturesCase Fan
Dimensions92*25mm

Otázky k tomuto produktu

How can I confirm the PF92251B1-0000-S99 fan is spinning correctly after installation?

Connect the 4-pin connector to a motherboard header, power on the system and check the fan speed reading in BIOS or monitoring software; the ball bearing should run smoothly at 12 V / 4.7 W.

What comes in the box with the Zyvpee 92×25 mm case fan and what must I purchase separately?

The package contains the black PF92251B1-0000-S99 fan unit only; mounting screws, fan filters or additional 4-pin extension cables are not included and must be bought separately.

Which version of the 92 mm Sunon PF92251B1-0000-S99 should I choose for a standard 12 V case fan header?

Select the 12 V 4.7 W 4-wire model (part 23.10696.001) with ball bearing and non-LED black frame; it matches a typical 4-pin PWM header and 92×25 mm mounting holes.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.