Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR3 DIMM modules with black chips, no heat spreaders

A-Tech

A-Tech 16GB Kit (2x8GB) DDR3 1600 CL11 240-Pin UDIMM for Dell OptiPlex 9020 9010 7020 7010 3020 3010 XE2

SKU CH-NBVQ-YJEFE

A 16 GB DDR3 1600 MHz kit of two 8 GB unbuffered UDIMMs for Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010 and XE2 desktops

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • 8GB
  • 16GB (2 x 8GB)
  • Boost multitasking with 16GB dual-channel DDR3 kit
  • Speed up loading times at 1600MHz PC3-12800
  • Drop-in fit for OptiPlex 9020 9010 7020 7010 3020 3010 XE2
  • Reliable JEDEC standard 1.5V or 1.35V unbuffered non-ECC modules
  • Easy home install with two 8GB 240-pin DIMMs

Dell OptiPlex DDR3 upgrade

This 16 GB kit contains two 8 GB unbuffered DIMMs built for Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010 and XE2 systems in USFF, SFF, MT and DT chassis. It is not compatible with All-in-One or Micro form factors. Buyers who need ECC registered memory or a different DDR generation cannot use this kit.

Installation and compatibility

Each module uses the standard 240 pin DDR3 interface and runs at 1600 MHz with CL11 latency. The dual rank 2Rx8 organisation works with the listed OptiPlex platforms without BIOS changes. Systems that require registered DIMMs or laptop SO DIMM modules will not accept these sticks.

Thermals and power

Modules operate at the JEDEC standard 1.5 V for DDR3 or 1.35 V for DDR3L and have no heat spreader. Power draw stays within normal DDR3 limits for desktop workloads. Noise is not a factor because the memory is completely passive.

Fordele

  • Boost multitasking with 16GB dual-channel DDR3 kit
  • Speed up loading times at 1600MHz PC3-12800
  • Drop-in fit for OptiPlex 9020 9010 7020 7010 3020 3010 XE2
  • Reliable JEDEC standard 1.5V or 1.35V unbuffered non-ECC modules
  • Easy home install with two 8GB 240-pin DIMMs

Specifikationer

BrandA-Tech
SeriesOptiPlex
Model9020, 9010, 7020, 7010, 3020, 3010, XE2 (USFF/SFF/MT/DT)
Part NumberNE-MS-0002
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010, XE2 (USFF/SFF/MT/DT)
FeaturesDesigned for Dell OptiPlex
Package Content2 Modules

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What is the maximum memory speed this kit will sustain under continuous load?

The modules run at DDR3 1600 (PC3-12800) with CL11 latency, which is the rated speed they maintain under sustained use.

How much heat or power do the two 8 GB modules draw when the system runs all day?

They operate at JEDEC standard 1.5 V or DDR3L 1.35 V without a heat spreader, so power draw and heat stay within normal DDR3 limits.

Which Dell OptiPlex chassis must I already own for this 240-pin kit to fit?

It fits OptiPlex 9020, 9010, 7020, 7010, 3020, 3010 and XE2 in USFF, SFF, MT or DT form factors; it does not fit All-in-One or Micro models.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.