Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR3 DIMM modules with black chips, no heat spreaders

A-Tech

A-Tech 16GB Kit (2x8GB) DDR3 1600 CL11 240-Pin UDIMM for Dell OptiPlex 9020 9010 7020 7010 3020 3010 XE2

SKU CH-NBVQ-YJEFE

A 16 GB DDR3 1600 MHz kit of two 8 GB unbuffered UDIMMs for Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010 and XE2 desktops

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • ECCNo
  • Buffered/RegisteredUnbuffered

Capacity 16GB (2 x 8GB)

  • 8GB
  • 16GB (2 x 8GB)
  • Boost multitasking with 16GB dual-channel DDR3 kit
  • Speed up loading times at 1600MHz PC3-12800
  • Drop-in fit for OptiPlex 9020 9010 7020 7010 3020 3010 XE2
  • Reliable JEDEC standard 1.5V or 1.35V unbuffered non-ECC modules
  • Easy home install with two 8GB 240-pin DIMMs

Dell OptiPlex DDR3 upgrade

This 16 GB kit contains two 8 GB unbuffered DIMMs built for Dell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010 and XE2 systems in USFF, SFF, MT and DT chassis. It is not compatible with All-in-One or Micro form factors. Buyers who need ECC registered memory or a different DDR generation cannot use this kit.

Installation and compatibility

Each module uses the standard 240 pin DDR3 interface and runs at 1600 MHz with CL11 latency. The dual rank 2Rx8 organisation works with the listed OptiPlex platforms without BIOS changes. Systems that require registered DIMMs or laptop SO DIMM modules will not accept these sticks.

Thermals and power

Modules operate at the JEDEC standard 1.5 V for DDR3 or 1.35 V for DDR3L and have no heat spreader. Power draw stays within normal DDR3 limits for desktop workloads. Noise is not a factor because the memory is completely passive.

Puncte forte

  • Boost multitasking with 16GB dual-channel DDR3 kit
  • Speed up loading times at 1600MHz PC3-12800
  • Drop-in fit for OptiPlex 9020 9010 7020 7010 3020 3010 XE2
  • Reliable JEDEC standard 1.5V or 1.35V unbuffered non-ECC modules
  • Easy home install with two 8GB 240-pin DIMMs

Specificații

BrandA-Tech
SeriesOptiPlex
Model9020, 9010, 7020, 7010, 3020, 3010, XE2 (USFF/SFF/MT/DT)
Part NumberNE-MS-0002
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemDell OptiPlex 9020, 9010, 7020, 7010, 3020, 3010, XE2 (USFF/SFF/MT/DT)
FeaturesDesigned for Dell OptiPlex
Package Content2 Modules

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What is the maximum memory speed this kit will sustain under continuous load?

The modules run at DDR3 1600 (PC3-12800) with CL11 latency, which is the rated speed they maintain under sustained use.

How much heat or power do the two 8 GB modules draw when the system runs all day?

They operate at JEDEC standard 1.5 V or DDR3L 1.35 V without a heat spreader, so power draw and heat stay within normal DDR3 limits.

Which Dell OptiPlex chassis must I already own for this 240-pin kit to fit?

It fits OptiPlex 9020, 9010, 7020, 7010, 3020, 3010 and XE2 in USFF, SFF, MT or DT form factors; it does not fit All-in-One or Micro models.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.