Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green DDR3 ECC registered DIMMs, 240-pin, 1.5V, 32GB kit

A-Tech

A-Tech 32GB 4x8GB DDR3 1066 ECC RDIMM 4Rx8 Server RAM

SKU CH-TAPF-WRGPV

A 32 GB DDR3 1066 MHz ECC registered quad-channel kit with four 8 GB modules, 4Rx8 organisation, 1.5 V operation and 240-pin DIMM form factor for server and workstation upgrades

  • Capacity32GB (4 x 8GB)
  • SpeedDDR3 1066 (PC3 8500)
  • CAS LatencyCL7
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (4 x 8GB)

Speed DDR3 1066 (PC3 8500)

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1066 MHz speed handles demanding workloads efficiently
  • ECC registered design detects and corrects data errors
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • 240-pin DIMM form factor fits compatible server and workstation slots

Server memory kit for DDR3 platforms

This 32 GB kit contains four 8 GB DDR3 1066 MHz registered ECC DIMMs built for servers and workstations that require quad-rank modules. Each stick runs at the standard 1.5 V DDR3 voltage and uses a 240-pin form factor. The kit is not compatible with desktop or laptop computers.

Thermals and power in normal use

Registered DDR3 modules operating at 1.5 V draw modest power and produce low heat under typical server workloads. The quad-rank organisation does not increase voltage, so thermal output remains comparable to standard registered DIMMs. No active cooling is required beyond normal chassis airflow.

Quad-rank registered ECC constraint

The 4Rx8 organisation means each module presents four logical ranks to the memory controller. Only systems whose BIOS and chipset explicitly support quad-rank registered ECC DIMMs can use this kit. Verify the platform documentation before purchase.

Fordele

  • 32 GB quad-channel kit expands server memory capacity
  • DDR3 1066 MHz speed handles demanding workloads efficiently
  • ECC registered design detects and corrects data errors
  • 5 V standard voltage ensures broad DDR3 platform compatibility
  • 240-pin DIMM form factor fits compatible server and workstation slots

Specifikationer

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 8GB 4Rx8 PC3-8500R
Capacity32GB (4 x 8GB)
SpeedDDR3 1066 (PC3 8500)
CAS LatencyCL7
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I install the 4Rx8 DDR3 1066 registered DIMMs into the 240-pin slots?

Power down the server, open the chassis, align each module's notch with the 240-pin DDR3 slot key, press firmly until the retention clips snap shut, then populate all four channels per the system manual for quad-channel operation.

Will the 1.5V DDR3 ECC RDIMMs need replacement after a certain period?

The modules are built with major-brand chips and tested for lifetime reliability; no scheduled replacement is required unless a module fails, in which case the lifetime warranty covers it.

At what point does the CL7 latency limit sustained throughput on heavy workloads?

CL7 timing at 1066 MHz sets the baseline access latency; under continuous heavy loads the memory controller's bandwidth ceiling is reached before latency becomes the primary bottleneck.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.