A-Tech 32GB (4x8GB) DDR3L 1600 ECC RDIMM 2Rx4 1.35V Server RAM
- 32GB (4 x 8GB)
- DDR3L 1600 (PC3L 12…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 32 GB DDR3 1066 MHz ECC registered quad-channel kit with four 8 GB modules, 4Rx8 organisation, 1.5 V operation and 240-pin DIMM form factor for server and workstation upgrades
Capacity 32GB (4 x 8GB)
Speed DDR3 1066 (PC3 8500)
This 32 GB kit contains four 8 GB DDR3 1066 MHz registered ECC DIMMs built for servers and workstations that require quad-rank modules. Each stick runs at the standard 1.5 V DDR3 voltage and uses a 240-pin form factor. The kit is not compatible with desktop or laptop computers.
Registered DDR3 modules operating at 1.5 V draw modest power and produce low heat under typical server workloads. The quad-rank organisation does not increase voltage, so thermal output remains comparable to standard registered DIMMs. No active cooling is required beyond normal chassis airflow.
The 4Rx8 organisation means each module presents four logical ranks to the memory controller. Only systems whose BIOS and chipset explicitly support quad-rank registered ECC DIMMs can use this kit. Verify the platform documentation before purchase.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 8GB 4Rx8 PC3-8500R |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR3 1066 (PC3 8500) |
| CAS Latency | CL7 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx8 |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power down the server, open the chassis, align each module's notch with the 240-pin DDR3 slot key, press firmly until the retention clips snap shut, then populate all four channels per the system manual for quad-channel operation.
The modules are built with major-brand chips and tested for lifetime reliability; no scheduled replacement is required unless a module fails, in which case the lifetime warranty covers it.
CL7 timing at 1066 MHz sets the baseline access latency; under continuous heavy loads the memory controller's bandwidth ceiling is reached before latency becomes the primary bottleneck.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?