Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green rectangular DDR3 DIMM module with black chips, no heat spreader, 240 pins visible

A-Tech

A-Tech 4GB DDR3 1866MHz CL13 1.5V Desktop RAM 754730-001

SKU CH-AYBS-37AHY

A 4 GB DDR3 1866 MHz CL13 unbuffered DIMM at 1.5 V for HP 754730-001 systems

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • Tested Frequency1866
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCNo
  • 4GB capacity adds multitasking headroom with a single module
  • DDR3 1866MHz speed accelerates data throughput for desktop workloads
  • CL13 latency at 1.5V balances responsiveness and standard power draw
  • 240-pin DIMM form factor fits compatible HP 754730-001 systems
  • Rigorously tested non-ECC unbuffered design delivers dependable operation

Compatible Replacement for HP 754730-001

This 4 GB DDR3 desktop module is built as a direct replacement for the HP 754730-001 part number. It targets owners of compatible HP systems who need a straightforward memory upgrade without ECC or registered buffering.

DDR3 1866 MHz Interface Limits

The DIMM runs at the DDR3 1866 standard (PC3-14900) with a CAS latency of 13 and the standard 1.5 V operating voltage. Systems that only support lower DDR3 speeds or different voltage levels will not be able to use this module at its rated specification.

240-Pin DIMM Form Factor Decides Fit

The module uses a 240-pin DDR3 DIMM layout, which is the single physical specification that determines whether it will seat in the motherboard slots. Verify that the target desktop accepts 240-pin DDR3 DIMMs before ordering.

Fordele

  • 4GB capacity adds multitasking headroom with a single module
  • DDR3 1866MHz speed accelerates data throughput for desktop workloads
  • CL13 latency at 1.5V balances responsiveness and standard power draw
  • 240-pin DIMM form factor fits compatible HP 754730-001 systems
  • Rigorously tested non-ECC unbuffered design delivers dependable operation

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for HP
Model754730-001
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
Tested Frequency1866
CAS LatencyCL13
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Features754730-001
Recommend UseCompatible Replacement for HP 754730-001

Spørgsmål om denne vare

Should I choose the single 4GB module or look for a kit?

The product is sold as a single 4GB module; if your board has two free DIMM slots you can add a second identical stick later to run dual-channel.

What does the 1866MHz rating deliver once installed?

The module runs at 1866 MT/s with CL13 latency at the standard 1.5V, giving the bandwidth and response times specified by the PC3-14900 rating.

Does the 240-pin DDR3 DIMM interface limit speed or capacity?

The 240-pin DDR3 DIMM form factor caps the module at DDR3 electrical signalling, so 1866MHz is the rated ceiling for this stick.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.