Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular DDR3 DIMM module with black chips, no heat spreader, 240 pins visible

A-Tech

A-Tech 4GB DDR3 1866MHz CL13 1.5V Desktop RAM 754730-001

SKU CH-AYBS-37AHY

A 4 GB DDR3 1866 MHz CL13 unbuffered DIMM at 1.5 V for HP 754730-001 systems

  • Capacity4GB
  • SpeedDDR3 1866 (PC3 14900)
  • Tested Frequency1866
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCNo
  • 4GB capacity adds multitasking headroom with a single module
  • DDR3 1866MHz speed accelerates data throughput for desktop workloads
  • CL13 latency at 1.5V balances responsiveness and standard power draw
  • 240-pin DIMM form factor fits compatible HP 754730-001 systems
  • Rigorously tested non-ECC unbuffered design delivers dependable operation

Compatible Replacement for HP 754730-001

This 4 GB DDR3 desktop module is built as a direct replacement for the HP 754730-001 part number. It targets owners of compatible HP systems who need a straightforward memory upgrade without ECC or registered buffering.

DDR3 1866 MHz Interface Limits

The DIMM runs at the DDR3 1866 standard (PC3-14900) with a CAS latency of 13 and the standard 1.5 V operating voltage. Systems that only support lower DDR3 speeds or different voltage levels will not be able to use this module at its rated specification.

240-Pin DIMM Form Factor Decides Fit

The module uses a 240-pin DDR3 DIMM layout, which is the single physical specification that determines whether it will seat in the motherboard slots. Verify that the target desktop accepts 240-pin DDR3 DIMMs before ordering.

Prednosti

  • 4GB capacity adds multitasking headroom with a single module
  • DDR3 1866MHz speed accelerates data throughput for desktop workloads
  • CL13 latency at 1.5V balances responsiveness and standard power draw
  • 240-pin DIMM form factor fits compatible HP 754730-001 systems
  • Rigorously tested non-ECC unbuffered design delivers dependable operation

Špecifikácie

BrandA-Tech
SeriesCompatible Replacement for HP
Model754730-001
Capacity4GB
SpeedDDR3 1866 (PC3 14900)
Tested Frequency1866
CAS LatencyCL13
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Features754730-001
Recommend UseCompatible Replacement for HP 754730-001

Otázky k tomuto produktu

Should I choose the single 4GB module or look for a kit?

The product is sold as a single 4GB module; if your board has two free DIMM slots you can add a second identical stick later to run dual-channel.

What does the 1866MHz rating deliver once installed?

The module runs at 1866 MT/s with CL13 latency at the standard 1.5V, giving the bandwidth and response times specified by the PC3-14900 rating.

Does the 240-pin DDR3 DIMM interface limit speed or capacity?

The 240-pin DDR3 DIMM form factor caps the module at DDR3 electrical signalling, so 1866MHz is the rated ceiling for this stick.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.