Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green rectangular laptop memory module with gold edge connectors and black chips on both sides

A-Tech

A-Tech 4GB DDR3L 1600 ECC SODIMM 204-Pin 1.35V

SKU CH-G7FM-S7X8A

4GB DDR3L 1600 ECC SODIMM adds error-correcting memory to compatible laptops and microservers at 1.35V

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection prevents data errors with built-in error correction
  • Low 1.35V DDR3L voltage reduces power draw and heat
  • 1600MHz speed delivers responsive multitasking for microserver workloads
  • 204-pin SO-DIMM form factor fits compatible laptop and microserver slots
  • Tested replacement for Micron MT18KSF51272HZ-1G6K2 ensures reliable compatibility

What this module is

This is a 4GB DDR3L SODIMM rated at 1600MHz with ECC and a 1.35V operating voltage. It uses the 204-pin form factor and runs at CL11 latency. The module is an unbuffered replacement for Micron MT18KSF51272HZ-1G6K2 and is aimed at microserver, server or workstation laptops that require error-correcting memory.

Compatibility checks

Verify that your system accepts DDR3L SODIMMs at 1.35V and supports ECC unbuffered modules. Confirm the motherboard or laptop manual lists 1600MHz PC3-12800 as a supported speed and that the slot is a 204-pin SO-DIMM socket. Some platforms only accept non-ECC or 1.5V DDR3, so matching voltage and ECC type is essential before ordering.

Who this suits

This module suits owners of compatible microserver or workstation laptops needing a single 4GB ECC stick for maintenance or a modest capacity increase. It is not for systems that require registered or buffered memory, nor for platforms limited to 1.5V DDR3 without low-voltage support. Buyers needing higher densities or non-ECC memory should look elsewhere.

Fordele

  • ECC protection prevents data errors with built-in error correction
  • Low 1.35V DDR3L voltage reduces power draw and heat
  • 1600MHz speed delivers responsive multitasking for microserver workloads
  • 204-pin SO-DIMM form factor fits compatible laptop and microserver slots
  • Tested replacement for Micron MT18KSF51272HZ-1G6K2 ensures reliable compatibility

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF51272HZ-1G6K2
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMT18KSF51272HZ-1G6K2
Recommend UseCompatible Replacement for Micron MT18KSF51272HZ-1G6K2

Spørgsmål om denne vare

Does the 4 GB DDR3L 1600 ECC SODIMM arrive as a single stick or do I need to buy anything else to install it?

The package contains one 4 GB 204-pin DDR3L 1600 CL11 1.35 V ECC unbuffered module; no extra parts or cables are required for installation.

Should I choose the 4 GB CL11 1.35 V version or look for a different capacity or speed for my microserver?

This module is a direct replacement for Micron MT18KSF51272HZ-1G6K2, so select it when your system calls for a single 4 GB DDR3L 1600 ECC SODIMM at 1.35 V.

What does the 1600 MHz PC3-12800 rating actually deliver once the stick is seated in a server board?

The module runs at DDR3L 1600 with CL11 timing at 1.35 V, providing ECC error correction and 12 800 MB/s peak bandwidth in compatible microserver or workstation slots.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.