Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular laptop memory module with gold edge connectors and black chips on both sides

A-Tech

A-Tech 4GB DDR3L 1600 ECC SODIMM 204-Pin 1.35V

SKU CH-G7FM-S7X8A

4GB DDR3L 1600 ECC SODIMM adds error-correcting memory to compatible laptops and microservers at 1.35V

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • ECC protection prevents data errors with built-in error correction
  • Low 1.35V DDR3L voltage reduces power draw and heat
  • 1600MHz speed delivers responsive multitasking for microserver workloads
  • 204-pin SO-DIMM form factor fits compatible laptop and microserver slots
  • Tested replacement for Micron MT18KSF51272HZ-1G6K2 ensures reliable compatibility

What this module is

This is a 4GB DDR3L SODIMM rated at 1600MHz with ECC and a 1.35V operating voltage. It uses the 204-pin form factor and runs at CL11 latency. The module is an unbuffered replacement for Micron MT18KSF51272HZ-1G6K2 and is aimed at microserver, server or workstation laptops that require error-correcting memory.

Compatibility checks

Verify that your system accepts DDR3L SODIMMs at 1.35V and supports ECC unbuffered modules. Confirm the motherboard or laptop manual lists 1600MHz PC3-12800 as a supported speed and that the slot is a 204-pin SO-DIMM socket. Some platforms only accept non-ECC or 1.5V DDR3, so matching voltage and ECC type is essential before ordering.

Who this suits

This module suits owners of compatible microserver or workstation laptops needing a single 4GB ECC stick for maintenance or a modest capacity increase. It is not for systems that require registered or buffered memory, nor for platforms limited to 1.5V DDR3 without low-voltage support. Buyers needing higher densities or non-ECC memory should look elsewhere.

Prednosti

  • ECC protection prevents data errors with built-in error correction
  • Low 1.35V DDR3L voltage reduces power draw and heat
  • 1600MHz speed delivers responsive multitasking for microserver workloads
  • 204-pin SO-DIMM form factor fits compatible laptop and microserver slots
  • Tested replacement for Micron MT18KSF51272HZ-1G6K2 ensures reliable compatibility

Špecifikácie

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT18KSF51272HZ-1G6K2
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Heat SpreaderNo
FeaturesMT18KSF51272HZ-1G6K2
Recommend UseCompatible Replacement for Micron MT18KSF51272HZ-1G6K2

Otázky k tomuto produktu

Does the 4 GB DDR3L 1600 ECC SODIMM arrive as a single stick or do I need to buy anything else to install it?

The package contains one 4 GB 204-pin DDR3L 1600 CL11 1.35 V ECC unbuffered module; no extra parts or cables are required for installation.

Should I choose the 4 GB CL11 1.35 V version or look for a different capacity or speed for my microserver?

This module is a direct replacement for Micron MT18KSF51272HZ-1G6K2, so select it when your system calls for a single 4 GB DDR3L 1600 ECC SODIMM at 1.35 V.

What does the 1600 MHz PC3-12800 rating actually deliver once the stick is seated in a server board?

The module runs at DDR3L 1600 with CL11 timing at 1.35 V, providing ECC error correction and 12 800 MB/s peak bandwidth in compatible microserver or workstation slots.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.