Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green 240-pin DDR3L UDIMM modules, silver heatsinks, 1.35V label

A-Tech

A-Tech 8GB (2x4GB) DDR3L 1600 ECC UDIMM 2Rx8 1.35V Server RAM

SKU CH-EM1K-K25WW

Dual-channel 8GB DDR3L 1600 ECC unbuffered kit with 2Rx8 modules at 1.35V for servers and workstations

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

Speed DDR3L 1600 (PC3L 12800)

  • ECC protection prevents data corruption in critical workloads
  • 35V DDR3L reduces power draw versus standard 1.5V DDR3
  • Dual-channel 2x4GB kit doubles memory bandwidth for server tasks
  • 1600MHz CL11 speed accelerates application loading and responsiveness
  • 240-pin UDIMM form factor fits compatible DDR3 server and workstation boards

DDR3L ECC UDIMM kit for servers

This A-Tech kit provides 8 GB of DDR3L 1600 ECC unbuffered memory in a matched pair of 4 GB modules. It is built for servers and workstations that require error-correcting code support and dual-channel operation. The modules run at 1.35 V low voltage and carry a CL11 latency rating. Desktop and laptop systems cannot use this memory.

DDR3L 1600 speed and voltage limits

The DDR3L standard tops out at 1600 MT/s and 1.35 V, so this kit runs at the highest JEDEC speed for the technology. Systems limited to 1.5 V DDR3 can still use the modules because they are backward compatible to that voltage. No higher DDR3L frequencies or lower voltages exist within the specification.

ECC unbuffered requirement decides fit

The single specification that determines compatibility is the need for ECC unbuffered DDR3L DIMMs in a 240-pin form factor. If your server or workstation manual calls for registered, fully buffered or non-ECC memory, this kit will not work. Buyers who need registered ECC or standard desktop memory must choose a different module type.

Fordele

  • ECC protection prevents data corruption in critical workloads
  • 35V DDR3L reduces power draw versus standard 1.5V DDR3
  • Dual-channel 2x4GB kit doubles memory bandwidth for server tasks
  • 1600MHz CL11 speed accelerates application loading and responsiveness
  • 240-pin UDIMM form factor fits compatible DDR3 server and workstation boards

Specifikationer

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3L-12800E
Capacity8GB (2 x 4GB)
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I choose this dual-channel 8 GB kit or a single 8 GB module for my server?

This kit provides two matched 4 GB modules for dual-channel operation, which doubles memory bandwidth compared to a single 8 GB stick on platforms that support it.

What does the 1600 MHz rating deliver in an actual server workload?

At 1600 MHz with CL11 timing, the modules move data at up to 12 800 MB/s per channel, reducing latency for database and virtualization tasks.

Is the PC3L-12800E interface limited to 1.35 V only?

The DDR3L modules run at 1.35 V but are also rated for 1.5 V, so they work in both low-voltage and standard DDR3 slots.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.