Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR4 ECC SODIMM sticks with black chips, no heat spreader

A-Tech

A-Tech 8GB (2x4GB) DDR4 2400 ECC SODIMM CL17 1.2V 260-Pin Kit

SKU CH-9TKN-7KC8Z

Dual-channel 8 GB DDR4 ECC SODIMM kit running at 2400 MHz with CL17 latency and 1.2 V operation

  • Capacity8GB (2 x 4GB)
  • Type260-Pin DDR4 SO-DIMM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 8GB (2 x 4GB)

  • 8GB (2 x 4GB)
  • 4GB
  • ECC protects data integrity in critical workloads
  • 8GB dual-channel kit (2×4GB) DDR4 2400 CL17 1.2V
  • 260-pin SODIMM fits compatible laptops and microservers
  • Single-rank 1Rx8 layout aids stability on supported platforms
  • Rigorously tested modules with major-brand DRAM ICs

ECC DDR4 SODIMM for workstations

This 8 GB kit contains two 4 GB unbuffered ECC SODIMM modules built for DDR4 systems that require error-correcting memory. It targets microservers, mobile workstations and NAS units where data integrity matters more than raw speed. The dual-channel pair installs in standard 260-pin slots.

Limited to DDR4 2400 ECC platforms

The modules run at DDR4 2400 (PC4-19200) with CL17 latency at 1.2 V. Systems that do not support ECC SODIMM or that lock memory to a lower speed will not benefit from the error-correction feature. Compatibility must be confirmed against the platform's qualified-vendor list before installation.

Single-rank 1Rx8 organisation

Each module uses a 1Rx8 single-rank layout, which determines how the memory controller addresses the chips. Boards that require dual-rank modules or a different rank-per-channel population rule will not recognise the full capacity. Check the system manual for supported rank configurations.

Fordele

  • ECC protects data integrity in critical workloads
  • 8GB dual-channel kit (2×4GB) DDR4 2400 CL17 1.2V
  • 260-pin SODIMM fits compatible laptops and microservers
  • Single-rank 1Rx8 layout aids stability on supported platforms
  • Rigorously tested modules with major-brand DRAM ICs

Specifikationer

BrandA-Tech
SeriesA-Tech DDR4 ECC SODIMM Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2400T-T ECC SODIMM RAM Kit
Part NumberNE-SS-1626
Capacity8GB (2 x 4GB)
Type260-Pin DDR4 SO-DIMM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips / ECC Error Correcting Technology
Recommend UseAMD & Intel Compatible
OptionMajor Brand DRAM IC Chips

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I choose the 2x4GB kit or look for a single 8GB module?

The 2x4GB dual-channel kit lets the memory controller interleave data across both modules, giving higher bandwidth than a single 8GB stick at the same 2400 MT/s speed.

What does the 2400 MT/s rating deliver once the modules are installed?

The system will transfer data at up to 2400 million transfers per second per channel, which is the PC4-19200 bandwidth class, provided the platform also supports that rate.

Is the 260-pin DDR4 SO-DIMM interface the limiting factor for speed?

The 260-pin DDR4 SO-DIMM form factor carries the 2400 MT/s signal defined by the PC4-19200 standard; the platform's memory controller ultimately caps the operating frequency.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.