Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green DDR3L ECC RDIMM 240-pin server memory module

A-Tech

A-Tech 8GB DDR3L 1066MHz ECC RDIMM 4Rx8 1.35V Server RAM

SKU CH-9MTR-VS6KP

8GB DDR3L 1066MHz ECC registered server memory module with 4Rx8 organisation and 1.35V operation

  • Capacity8GB
  • SpeedDDR3L 1066 (PC3L 8500)
  • CAS LatencyCL3
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR3L 1066MHz speed delivers PC3-8500 bandwidth for responsive operation
  • ECC registered design detects and corrects data errors automatically
  • 35V low-voltage DDR3L reduces power draw and heat output
  • 4Rx8 240-pin RDIMM form factor fits compatible DDR3L server slots

Capacity and form factor

This is an 8GB DDR3L registered DIMM built for server and workstation platforms that require error-correcting memory. The module runs at 1066MHz with a CAS latency of CL3 and operates at 1.35V low voltage. It uses a 4Rx8 organisation on a 240-pin interface.

Compatibility fit

It suits administrators upgrading or repairing systems qualified for the Micron MT36KSF1G72PDZ-1G1M1 part number. Builders needing unbuffered UDIMMs, higher frequencies, larger single-module capacities, or non-ECC memory should look elsewhere.

Sustained operation

Registered buffering and ECC correction maintain data integrity during continuous multi-threaded workloads. The low-voltage design reduces power draw and heat output when the module is populated across multiple slots for extended periods.

Fordele

  • 8GB capacity expands server memory for heavier workloads
  • DDR3L 1066MHz speed delivers PC3-8500 bandwidth for responsive operation
  • ECC registered design detects and corrects data errors automatically
  • 35V low-voltage DDR3L reduces power draw and heat output
  • 4Rx8 240-pin RDIMM form factor fits compatible DDR3L server slots

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36KSF1G72PDZ-1G1M1
Capacity8GB
SpeedDDR3L 1066 (PC3L 8500)
CAS LatencyCL3
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMicron Chipset
FeaturesMT36KSF1G72PDZ-1G1M1

Spørgsmål om denne vare

Will my motherboard need to support 240-pin DDR3L RDIMMs at 1.35V for this module to work?

Yes — this is a 240-pin DDR3L registered DIMM that runs at 1.35V, so the board must accept DDR3L RDIMMs at that voltage and pin count.

Can I mix this 4Rx8 registered ECC module with older unbuffered non-ECC DIMMs in the same server?

No — registered ECC RDIMMs cannot be mixed with unbuffered non-ECC memory; the memory controller requires all slots to use the same registered ECC type.

How can I confirm the module is running at 1066MHz with ECC active after installation?

Check the BIOS memory information or use a tool like dmidecode to verify the speed shows 1066MHz, the type is DDR3L, and ECC status reads enabled.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.