Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

A-Tech

A-Tech 8GB DDR3L 1066MHz ECC RDIMM 4Rx8 1.35V Server RAM

SKU CH-9MTR-VS6KP

8GB DDR3L 1066MHz ECC registered server memory module with 4Rx8 organisation and 1.35V operation

  • Capacity8GB
  • SpeedDDR3L 1066 (PC3L 8500)
  • CAS LatencyCL3
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory for heavier workloads
  • DDR3L 1066MHz speed delivers PC3-8500 bandwidth for responsive operation
  • ECC registered design detects and corrects data errors automatically
  • 35V low-voltage DDR3L reduces power draw and heat output
  • 4Rx8 240-pin RDIMM form factor fits compatible DDR3L server slots

Capacity and form factor

This is an 8GB DDR3L registered DIMM built for server and workstation platforms that require error-correcting memory. The module runs at 1066MHz with a CAS latency of CL3 and operates at 1.35V low voltage. It uses a 4Rx8 organisation on a 240-pin interface.

Compatibility fit

It suits administrators upgrading or repairing systems qualified for the Micron MT36KSF1G72PDZ-1G1M1 part number. Builders needing unbuffered UDIMMs, higher frequencies, larger single-module capacities, or non-ECC memory should look elsewhere.

Sustained operation

Registered buffering and ECC correction maintain data integrity during continuous multi-threaded workloads. The low-voltage design reduces power draw and heat output when the module is populated across multiple slots for extended periods.

Prednosti

  • 8GB capacity expands server memory for heavier workloads
  • DDR3L 1066MHz speed delivers PC3-8500 bandwidth for responsive operation
  • ECC registered design detects and corrects data errors automatically
  • 35V low-voltage DDR3L reduces power draw and heat output
  • 4Rx8 240-pin RDIMM form factor fits compatible DDR3L server slots

Špecifikácie

BrandA-Tech
SeriesCompatible Replacement for Micron
ModelMT36KSF1G72PDZ-1G1M1
Capacity8GB
SpeedDDR3L 1066 (PC3L 8500)
CAS LatencyCL3
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx8
ChipsetMicron Chipset
FeaturesMT36KSF1G72PDZ-1G1M1

Otázky k tomuto produktu

Will my motherboard need to support 240-pin DDR3L RDIMMs at 1.35V for this module to work?

Yes — this is a 240-pin DDR3L registered DIMM that runs at 1.35V, so the board must accept DDR3L RDIMMs at that voltage and pin count.

Can I mix this 4Rx8 registered ECC module with older unbuffered non-ECC DIMMs in the same server?

No — registered ECC RDIMMs cannot be mixed with unbuffered non-ECC memory; the memory controller requires all slots to use the same registered ECC type.

How can I confirm the module is running at 1066MHz with ECC active after installation?

Check the BIOS memory information or use a tool like dmidecode to verify the speed shows 1066MHz, the type is DDR3L, and ECC status reads enabled.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.