Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green 240-pin DDR3L ECC RDIMM module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3L 1333MHz ECC RDIMM 2Rx4 1.35V for Dell 319-1811 Server RAM

SKU CH-YC45-KFK7K

8GB DDR3L 1333MHz ECC registered DIMM, 2Rx4, 1.35V, 240-pin, compatible with Dell 319-1811 server memory slots

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3L 1333MHz speed matches Dell 319-1811 specifications exactly
  • ECC registered design detects and corrects data errors automatically
  • 35V low voltage reduces power draw and heat output
  • 240-pin 2Rx4 form factor fits compatible Dell server slots directly

Dell 319-1811 Compatible Server Memory

This 8GB DDR3L 1333MHz ECC RDIMM is built for Dell servers that require registered, low-voltage memory. It targets administrators who need to expand capacity in supported platforms without changing the existing memory architecture. The module uses major-brand chips tested for dependable operation in enterprise environments. It arrives new and ready for immediate installation.

Registered 240-Pin DIMM with 1.35V Operation

The 240-pin registered form factor plugs directly into compatible DDR3 server slots, and the 1.35V DDR3L voltage reduces power draw compared with standard DDR3. ECC and registered buffering work together to detect and correct single-bit errors while reducing electrical load on the memory controller. CL9 latency at PC3L-10600 speed maintains stability under sustained workloads. The 2Rx4 rank organisation fits the density requirements of the listed Dell part numbers.

Replaces Standard DDR3 or Lower-Capacity Modules

This module upgrades systems currently running non-ECC unbuffered DDR3 or smaller registered DIMMs that limit total memory. The jump is worth it when the platform supports registered ECC memory and the workload demands error correction and higher density per slot. It is not for consumer desktops, laptops, or any platform that requires unbuffered memory or a different DDR generation.

Fordele

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3L 1333MHz speed matches Dell 319-1811 specifications exactly
  • ECC registered design detects and corrects data errors automatically
  • 35V low voltage reduces power draw and heat output
  • 240-pin 2Rx4 form factor fits compatible Dell server slots directly

Specifikationer

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Spørgsmål om denne vare

What DDR3L standard does this 1333MHz module follow and what bandwidth does that cap it at?

It runs at DDR3L 1333 (PC3L-10600), so the peak transfer rate is limited to 10600 MB/s.

What physical slot and pin count does this 240-pin RDIMM require?

It fits a standard DDR3 240-pin DIMM socket; the registered design needs a server or workstation board that supports RDIMMs.

How is the module installed and what step do people often miss?

Align the notch with the key, press straight down until both latches click; the step many miss is confirming the system requires registered ECC memory before buying.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.