Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3L ECC RDIMM module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3L 1333MHz ECC RDIMM 2Rx4 1.35V for Dell 319-1811 Server RAM

SKU CH-YC45-KFK7K

8GB DDR3L 1333MHz ECC registered DIMM, 2Rx4, 1.35V, 240-pin, compatible with Dell 319-1811 server memory slots

  • Capacity8GB
  • SpeedDDR3L 1333 (PC3L 10600)
  • CAS LatencyCL9
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3L 1333MHz speed matches Dell 319-1811 specifications exactly
  • ECC registered design detects and corrects data errors automatically
  • 35V low voltage reduces power draw and heat output
  • 240-pin 2Rx4 form factor fits compatible Dell server slots directly

Dell 319-1811 Compatible Server Memory

This 8GB DDR3L 1333MHz ECC RDIMM is built for Dell servers that require registered, low-voltage memory. It targets administrators who need to expand capacity in supported platforms without changing the existing memory architecture. The module uses major-brand chips tested for dependable operation in enterprise environments. It arrives new and ready for immediate installation.

Registered 240-Pin DIMM with 1.35V Operation

The 240-pin registered form factor plugs directly into compatible DDR3 server slots, and the 1.35V DDR3L voltage reduces power draw compared with standard DDR3. ECC and registered buffering work together to detect and correct single-bit errors while reducing electrical load on the memory controller. CL9 latency at PC3L-10600 speed maintains stability under sustained workloads. The 2Rx4 rank organisation fits the density requirements of the listed Dell part numbers.

Replaces Standard DDR3 or Lower-Capacity Modules

This module upgrades systems currently running non-ECC unbuffered DDR3 or smaller registered DIMMs that limit total memory. The jump is worth it when the platform supports registered ECC memory and the workload demands error correction and higher density per slot. It is not for consumer desktops, laptops, or any platform that requires unbuffered memory or a different DDR generation.

Pluspunten

  • 8GB capacity expands server memory headroom for heavier workloads
  • DDR3L 1333MHz speed matches Dell 319-1811 specifications exactly
  • ECC registered design detects and corrects data errors automatically
  • 35V low voltage reduces power draw and heat output
  • 240-pin 2Rx4 form factor fits compatible Dell server slots directly

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR3L 1333 (PC3L 10600)
CAS LatencyCL9
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

What DDR3L standard does this 1333MHz module follow and what bandwidth does that cap it at?

It runs at DDR3L 1333 (PC3L-10600), so the peak transfer rate is limited to 10600 MB/s.

What physical slot and pin count does this 240-pin RDIMM require?

It fits a standard DDR3 240-pin DIMM socket; the registered design needs a server or workstation board that supports RDIMMs.

How is the module installed and what step do people often miss?

Align the notch with the key, press straight down until both latches click; the step many miss is confirming the system requires registered ECC memory before buying.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.