Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

Brute Networks

Brute Networks Cisco Compatible UCS-MR-1X322RUA-RF 32GB DDR4-2133 2Rx4 1.2V ECC Registered RDIMM

SKU CH-P3HZ-Z0BFW

32 GB DDR4-2133 registered ECC server memory module for expanding capacity in compatible Cisco UCS systems

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity lets you run more virtual machines
  • DDR4-2133 speed at 1.2 V reduces power draw per module
  • ECC registered design protects data integrity in critical workloads
  • 288-pin RDIMM form factor fits compatible Cisco UCS servers
  • 100 % Cisco compatible with major-brand DRAM chips

Cisco Compatible 32GB DDR4-2133 ECC RDIMM

This 32GB registered DIMM is built for Cisco UCS servers that require DDR4-2133 ECC memory. It targets administrators who need to expand capacity in qualified platforms without purchasing OEM-labelled modules. The 2Rx4 organisation and 1.2V operation match the original specification. Buyers who need non-ECC or unbuffered memory for workstation or desktop boards cannot use this module.

32GB capacity and DDR4-2133 headroom

The module delivers 32GB per stick at PC4-17000 speed, letting a supported server address larger working sets and run more virtual machines before paging occurs. Registered signalling and ECC protect data integrity in multi-DIMM configurations. Systems limited to lower memory speeds or smaller maximum capacities will not benefit from the full 32GB or the 2133MT/s rate.

288-pin registered build with major-brand chips

Each DIMM uses 288-pin DDR4 construction populated with Samsung, SK Hynix or Micron components and meets the OEM timing and voltage requirements. The registered buffer reduces electrical load on the memory controller, allowing higher densities per channel. The 1.2V rating keeps power draw consistent with the platform design. Modules that lack registration or ECC will not function in the target Cisco UCS slots.

Fordele

  • 32 GB capacity lets you run more virtual machines
  • DDR4-2133 speed at 1.2 V reduces power draw per module
  • ECC registered design protects data integrity in critical workloads
  • 288-pin RDIMM form factor fits compatible Cisco UCS servers
  • 100 % Cisco compatible with major-brand DRAM chips

Specifikationer

BrandCisco
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Spørgsmål om denne vare

Will this 32GB DDR4-2133 2Rx4 RDIMM run at its rated speed alongside other DDR4 modules already in my server?

The module operates at DDR4 2133 (PC4 17000) and the system will clock all installed DIMMs to the lowest common speed, so it will run at the speed of the slowest module present.

How can I confirm the 32GB DDR4-2133 ECC RDIMM is functioning correctly after installation?

Check the BIOS or UEFI memory summary to verify the full 32GB capacity is detected, the speed shows DDR4 2133, and ECC status is reported as enabled or active.

What is included with the 288-pin 32GB DDR4-2133 RDIMM and what must I source separately?

The box contains the single 32GB DDR4-2133 2Rx4 1.2V ECC Registered RDIMM; no cables, brackets, heatsinks or additional hardware are supplied.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.