Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green 288-pin DDR4 RDIMM module with black chips, 32GB 2Rx4 1.2V ECC registered

Brute Networks

Brute Networks Cisco Compatible UCS-MR-1X322RUA-RF 32GB DDR4-2133 2Rx4 1.2V ECC Registered RDIMM

SKU CH-P3HZ-Z0BFW

32 GB DDR4-2133 registered ECC server memory module for expanding capacity in compatible Cisco UCS systems

  • Capacity32GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 32 GB capacity lets you run more virtual machines
  • DDR4-2133 speed at 1.2 V reduces power draw per module
  • ECC registered design protects data integrity in critical workloads
  • 288-pin RDIMM form factor fits compatible Cisco UCS servers
  • 100 % Cisco compatible with major-brand DRAM chips

Cisco Compatible 32GB DDR4-2133 ECC RDIMM

This 32GB registered DIMM is built for Cisco UCS servers that require DDR4-2133 ECC memory. It targets administrators who need to expand capacity in qualified platforms without purchasing OEM-labelled modules. The 2Rx4 organisation and 1.2V operation match the original specification. Buyers who need non-ECC or unbuffered memory for workstation or desktop boards cannot use this module.

32GB capacity and DDR4-2133 headroom

The module delivers 32GB per stick at PC4-17000 speed, letting a supported server address larger working sets and run more virtual machines before paging occurs. Registered signalling and ECC protect data integrity in multi-DIMM configurations. Systems limited to lower memory speeds or smaller maximum capacities will not benefit from the full 32GB or the 2133MT/s rate.

288-pin registered build with major-brand chips

Each DIMM uses 288-pin DDR4 construction populated with Samsung, SK Hynix or Micron components and meets the OEM timing and voltage requirements. The registered buffer reduces electrical load on the memory controller, allowing higher densities per channel. The 1.2V rating keeps power draw consistent with the platform design. Modules that lack registration or ECC will not function in the target Cisco UCS slots.

Punti di forza

  • 32 GB capacity lets you run more virtual machines
  • DDR4-2133 speed at 1.2 V reduces power draw per module
  • ECC registered design protects data integrity in critical workloads
  • 288-pin RDIMM form factor fits compatible Cisco UCS servers
  • 100 % Cisco compatible with major-brand DRAM chips

Caratteristiche tecniche

BrandCisco
Capacity32GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Domande su questo articolo

Will this 32GB DDR4-2133 2Rx4 RDIMM run at its rated speed alongside other DDR4 modules already in my server?

The module operates at DDR4 2133 (PC4 17000) and the system will clock all installed DIMMs to the lowest common speed, so it will run at the speed of the slowest module present.

How can I confirm the 32GB DDR4-2133 ECC RDIMM is functioning correctly after installation?

Check the BIOS or UEFI memory summary to verify the full 32GB capacity is detected, the speed shows DDR4 2133, and ECC status is reported as enabled or active.

What is included with the 288-pin 32GB DDR4-2133 RDIMM and what must I source separately?

The box contains the single 32GB DDR4-2133 2Rx4 1.2V ECC Registered RDIMM; no cables, brackets, heatsinks or additional hardware are supplied.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.