Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR4 DIMM sticks, no heat spreader, 288-pin

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR4 2133MHz CL15 Non-ECC DIMM memory upgrade

SKU CH-R56K-9BS1G

8GB dual-channel DDR4 kit at 2133 MHz CL15 for Supermicro X11SSL-F, X11SSH-F and X11SSZ-QF servers

  • Capacity8GB (2 x 4GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Timing15-15-15
  • Voltage1.2V
  • 8GB dual-channel kit expands system memory capacity
  • 2133 MHz DDR4 speed matches platform specification
  • CL15 latency with 1.2V operation for efficient performance
  • Validated for Supermicro X11SSL-F, X11SSH-F and X11SSZ-QF systems
  • Two 4GB unbuffered non-ECC DIMMs using major-brand chipset

8GB DDR4 Kit for Supermicro Servers

This two-module kit delivers 8GB of DDR4-2133 memory in a 2x4GB configuration. It is built specifically for Supermicro 5019S-L, X11SSL-F, X11SSH-F and X11SSZ-QF systems. The unbuffered, non-ECC DIMMs suit administrators upgrading compatible Supermicro platforms that accept standard UDIMMs.

64GB System Limit and Speed Behaviour

The supported platforms cap total memory at 64GB across four sockets, so this kit occupies half the available slots. Faster modules will automatically clock down to 2133, 1866 or 1600MHz depending on the processor and population, ensuring stable operation without manual tuning.

Matched Pair for Dual-Channel Operation

The package supplies two identical 4GB sticks tested together, enabling dual-channel bandwidth on the supported boards. Installing matched pairs avoids timing mismatches that can occur when mixing x4 and x8 modules within the same bank, a restriction noted for these platforms.

Fordele

  • 8GB dual-channel kit expands system memory capacity
  • 2133 MHz DDR4 speed matches platform specification
  • CL15 latency with 1.2V operation for efficient performance
  • Validated for Supermicro X11SSL-F, X11SSH-F and X11SSZ-QF systems
  • Two 4GB unbuffered non-ECC DIMMs using major-brand chipset

Specifikationer

BrandComputer Memory Solutions
ModelCM512642133DIMM
Capacity8GB (2 x 4GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Timing15-15-15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSupermicro 5019S-L Super X11SSL-F X11SSH-F X11SSZ-QF
Package Content2 Memory RAM Sticks

Spørgsmål om denne vare

Will these 2133 MHz DDR4 modules run correctly with my existing 1600 MHz or 1866 MHz DDR4 DIMMs in the Supermicro X11SSL-F?

Faster memory clocks down to the optimal speed and voltage for the processor and module count installed, so the 2133 MHz kit will operate at the lower speed of any slower DIMMs already present.

How can I confirm the 8 GB kit is recognised at 2133 MHz with CL15 timing after installation?

Check the BIOS memory information or an OS tool such as dmidecode; it should report 8 GB total, 2133 MT/s data rate and 15-15-15 CAS latency for each 4 GB module.

Does the package contain only the two 4 GB DIMMs or are any cables or brackets included?

The box includes exactly two 288-pin DDR4 UDIMM sticks; no cables, brackets or additional hardware are supplied.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.