SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$ 391,99
0.00501067BTC
Op voorraad
Computer Memory Solutions
Computer Memory Solutions 8GB (2x4GB) DDR4 2133MHz CL15 Non-ECC DIMM memory upgrade
8GB dual-channel DDR4 kit at 2133 MHz CL15 for Supermicro X11SSL-F, X11SSH-F and X11SSZ-QF servers
- Capacity8GB (2 x 4GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Timing15-15-15
- Voltage1.2V
- 8GB dual-channel kit expands system memory capacity
- 2133 MHz DDR4 speed matches platform specification
- CL15 latency with 1.2V operation for efficient performance
- Validated for Supermicro X11SSL-F, X11SSH-F and X11SSZ-QF systems
- Two 4GB unbuffered non-ECC DIMMs using major-brand chipset
8GB DDR4 Kit for Supermicro Servers
This two-module kit delivers 8GB of DDR4-2133 memory in a 2x4GB configuration. It is built specifically for Supermicro 5019S-L, X11SSL-F, X11SSH-F and X11SSZ-QF systems. The unbuffered, non-ECC DIMMs suit administrators upgrading compatible Supermicro platforms that accept standard UDIMMs.
64GB System Limit and Speed Behaviour
The supported platforms cap total memory at 64GB across four sockets, so this kit occupies half the available slots. Faster modules will automatically clock down to 2133, 1866 or 1600MHz depending on the processor and population, ensuring stable operation without manual tuning.
Matched Pair for Dual-Channel Operation
The package supplies two identical 4GB sticks tested together, enabling dual-channel bandwidth on the supported boards. Installing matched pairs avoids timing mismatches that can occur when mixing x4 and x8 modules within the same bank, a restriction noted for these platforms.
Pluspunten
- 8GB dual-channel kit expands system memory capacity
- 2133 MHz DDR4 speed matches platform specification
- CL15 latency with 1.2V operation for efficient performance
- Validated for Supermicro X11SSL-F, X11SSH-F and X11SSZ-QF systems
- Two 4GB unbuffered non-ECC DIMMs using major-brand chipset
Specificaties
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512642133DIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Supermicro 5019S-L Super X11SSL-F X11SSH-F X11SSZ-QF |
| Package Content | 2 Memory RAM Sticks |
Vragen over dit artikel
Will these 2133 MHz DDR4 modules run correctly with my existing 1600 MHz or 1866 MHz DDR4 DIMMs in the Supermicro X11SSL-F?
Faster memory clocks down to the optimal speed and voltage for the processor and module count installed, so the 2133 MHz kit will operate at the lower speed of any slower DIMMs already present.
How can I confirm the 8 GB kit is recognised at 2133 MHz with CL15 timing after installation?
Check the BIOS memory information or an OS tool such as dmidecode; it should report 8 GB total, 2133 MT/s data rate and 15-15-15 CAS latency for each 4 GB module.
Does the package contain only the two 4 GB DIMMs or are any cables or brackets included?
The box includes exactly two 288-pin DDR4 UDIMM sticks; no cables, brackets or additional hardware are supplied.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
US$ 74,99
0.00095857BTC
Op voorraad