暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 DIMM sticks, no heat spreader, 288-pin

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR4 2133MHz CL15 Non-ECC DIMM memory upgrade

SKU CH-R56K-9BS1G

8GB dual-channel DDR4 kit at 2133 MHz CL15 for Supermicro X11SSL-F, X11SSH-F and X11SSZ-QF servers

  • Capacity8GB (2 x 4GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Timing15-15-15
  • Voltage1.2V
  • 8GB dual-channel kit expands system memory capacity
  • 2133 MHz DDR4 speed matches platform specification
  • CL15 latency with 1.2V operation for efficient performance
  • Validated for Supermicro X11SSL-F, X11SSH-F and X11SSZ-QF systems
  • Two 4GB unbuffered non-ECC DIMMs using major-brand chipset

8GB DDR4 Kit for Supermicro Servers

This two-module kit delivers 8GB of DDR4-2133 memory in a 2x4GB configuration. It is built specifically for Supermicro 5019S-L, X11SSL-F, X11SSH-F and X11SSZ-QF systems. The unbuffered, non-ECC DIMMs suit administrators upgrading compatible Supermicro platforms that accept standard UDIMMs.

64GB System Limit and Speed Behaviour

The supported platforms cap total memory at 64GB across four sockets, so this kit occupies half the available slots. Faster modules will automatically clock down to 2133, 1866 or 1600MHz depending on the processor and population, ensuring stable operation without manual tuning.

Matched Pair for Dual-Channel Operation

The package supplies two identical 4GB sticks tested together, enabling dual-channel bandwidth on the supported boards. Installing matched pairs avoids timing mismatches that can occur when mixing x4 and x8 modules within the same bank, a restriction noted for these platforms.

特長

  • 8GB dual-channel kit expands system memory capacity
  • 2133 MHz DDR4 speed matches platform specification
  • CL15 latency with 1.2V operation for efficient performance
  • Validated for Supermicro X11SSL-F, X11SSH-F and X11SSZ-QF systems
  • Two 4GB unbuffered non-ECC DIMMs using major-brand chipset

仕様

BrandComputer Memory Solutions
ModelCM512642133DIMM
Capacity8GB (2 x 4GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Timing15-15-15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSupermicro 5019S-L Super X11SSL-F X11SSH-F X11SSZ-QF
Package Content2 Memory RAM Sticks

この商品に関する質問

Will these 2133 MHz DDR4 modules run correctly with my existing 1600 MHz or 1866 MHz DDR4 DIMMs in the Supermicro X11SSL-F?

Faster memory clocks down to the optimal speed and voltage for the processor and module count installed, so the 2133 MHz kit will operate at the lower speed of any slower DIMMs already present.

How can I confirm the 8 GB kit is recognised at 2133 MHz with CL15 timing after installation?

Check the BIOS memory information or an OS tool such as dmidecode; it should report 8 GB total, 2133 MT/s data rate and 15-15-15 CAS latency for each 4 GB module.

Does the package contain only the two 4 GB DIMMs or are any cables or brackets included?

The box includes exactly two 288-pin DDR4 UDIMM sticks; no cables, brackets or additional hardware are supplied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。