NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
HUANANZHI
ATX X99 board with 14-core Xeon E5-2680 V4, eight DDR4 slots up to 2400 MT/s, dual NVME M.2, eight SATA3 ports, six USB3.0 ports and Gigabit Ethernet
This ATX motherboard pairs the Intel X99 chipset with a 14-core Xeon E5 2680 V4 running at 2.4 GHz and 35 MB L3 cache. The LGA 2011-3 platform targets multi-threaded workloads such as rendering, virtualization and compute-heavy servers. Eight DDR4 slots in quad-channel layout accept up to 32 GB per module at 1866, 2133 or 2400 MT/s, supporting both non-ECC and registered ECC memory.
The CPU draws 120 W and the supplier notes a minimum 500 W power supply for the platform. Verify that your PSU delivers enough 12 V current and that the case can accommodate an ATX board measuring 300 by 244 mm. A discrete graphics card is required because the board has no integrated video output. Ensure your cooler mounts on LGA 2011-3 and clears the 10-layer PCB and six-phase VRM heatsinks.
Expansion includes two PCI-E 3.0 x16 slots, two x1 slots and one x4 slot for GPUs, capture cards or additional I/O. Storage connectivity provides eight SATA 3.0 ports and two M.2 NVME sockets alongside an M.2 WIFI key. Rear I/O supplies six USB 3.0 ports with eight USB 2.0 headers for front-panel expansion. Gigabit Ethernet handles wired networking.
| Brand | HUANANZHI |
|---|---|
| Model | X99 F8 |
| CPU Socket Type | LGA 2011 |
The combo kit includes the Xeon E5 2680 V4 processor with 14 cores and 28 threads installed on the motherboard, so no separate CPU purchase is required.
The board supports DDR4 at 1866, 2133 and 2400 MHz; 2400 MHz modules will run at the highest supported frequency for maximum bandwidth.
The CPU draws up to 120 W, and the manufacturer advises a power supply of at least 500 W to handle the whole platform reliably.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?