Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Grey square thermal pad 120x120x1.5mm 15g

Lirealar

Lirealar 120x120mm thermal pad 12.8 W/mK 1.5mm 15g

SKU CH-D4QN-938S5 MPN 120x120mm

A 120 × 120 × 1.5 mm silicone thermal pad rated at 12.8 W/mK that fills gaps between CPUs, GPUs or LEDs and their heatsinks while remaining electrically non-conductive and reusable

  • Volume / Net Weight15g
  • Thermal Conductivity12.8 W/mK,
  • Long Term Operating Temperature-40 C to +400C
  • SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/c
  • FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi

Type Thermal Pad

Model 120x120mm

De overstregede versioner findes, men er ikke på lager her.

Specification 1.5mm

Vis 1 flere konfigurationer
  • High 12.8 W/mK conductivity moves heat efficiently from CPU or GPU
  • Non-conductive insulation prevents electrical shorts on sensitive components
  • Flexible 1.5 mm thickness fills uneven gaps between die and heatsink
  • Wide -40 °C to 200 °C range suits desktop, laptop and LED coolers
  • Reusable non-curing pad installs cleanly and can be repositioned

Gap-filling pad for desktop and laptop heatsinks

This 120x120mm silicone pad sits between a GPU, CPU or LED module and its cooler to replace air gaps with a 12.8 W/mK thermal path. The 1.5mm thickness and 15g weight suit stock cooler clearances on mainstream graphics cards and notebooks. Non-conductive and non-corrosive chemistry makes it safe for direct die contact.

Softness range limits clamping pressure

Shore 00 hardness spans 30 to 55 so the pad compresses under light mounting force but will not flow like grease. Continuous operating temperature is rated from -40°C to 200°C with a short-term peak of 400°C. Breakdown voltage exceeds 9.8 kV at 1mm, providing electrical isolation across the interface.

Peel-and-place install with reusable viscosity

Natural tack holds the sheet in position while you align the heatsink, and the pad can be lifted and repositioned if the first seat is uneven. Density of 3.1 g/cc means it resists pump-out over thermal cycles. Installers must ensure the 1.5mm thickness matches the specific gap; thinner or thicker stacks will not be compensated by this single sheet.

Fordele

  • High 12.8 W/mK conductivity moves heat efficiently from CPU or GPU
  • Non-conductive insulation prevents electrical shorts on sensitive components
  • Flexible 1.5 mm thickness fills uneven gaps between die and heatsink
  • Wide -40 °C to 200 °C range suits desktop, laptop and LED coolers
  • Reusable non-curing pad installs cleanly and can be repositioned

Specifikationer

SeriesThermal Pad
Model120x120x1.5mm
Volume / Net Weight15g
Thermal Conductivity12.8 W/mK,
Long Term Operating Temperature-40 C to +400C
SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/cc Hardness:30-55(Sc) Breakdown Voltage:>9.8KV(1mm) Temperature Range:-40°C~200°C
FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi One Pad , multi-purpose, durable,insulated, non-conductive lnsulation does not conduct electricity and is safe for use Natural viscosity, easy to assemble and reusable

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Which thickness should I pick for my GPU or CPU gap?

The pad is 1.5 mm thick, a common size for many stock cooler clearances; measure your gap before ordering.

What does 12.8 W/mK mean for actual temperatures?

It indicates high thermal conductivity for a silicone pad, so heat moves from die to heatsink more efficiently than standard pads, lowering junction temperatures under load.

Is the pad electrically safe and what voltage can it withstand?

It is non-conductive with a breakdown voltage above 9.8 kV per mm, providing reliable insulation for typical low-voltage PC components.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.