Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 4800 ECC RDIMM CL40 1.1V 2Rx4 THINKMATE Compatible memory upgrade

SKU CH-R16A-KA95J

256GB registered DDR5 ECC kit with four 64GB modules at 4800MT/s CL40 for ThinkMate Supermicro servers

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity with four 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for data integrity
  • CL40 latency at 1.1 V operating voltage
  • 288-pin 2Rx4 form factor for ThinkMate SuperServer 111C-NR and 121C-TN10R compatibility

256GB DDR5 ECC RDIMM kit

This NEMIX RAM kit provides 256GB of DDR5 memory across four 64GB registered DIMMs. It is built for THINKMATE Supermicro SuperServer platforms that require ECC RDIMM modules for stable operation. The memory runs at 4800MHz with CL40 latency at 1.1V.

Upgrading from lower-capacity RDIMMs

The kit replaces smaller DDR5 RDIMM sets when workloads demand more memory bandwidth and capacity for virtualization or database tasks. The jump is worth it when the server chassis has four available slots and the firmware supports 64GB dual-rank modules at this speed.

Installing four registered modules

Installation follows standard 288-pin DDR5 RDIMM procedure and typically takes minutes per module. Ensure the server BIOS is current and that the memory configuration matches the motherboard population rules for 2Rx4 registered DIMMs. Improper slot order is the most common cause of post failures.

Fordele

  • 256 GB total capacity with four 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for data integrity
  • CL40 latency at 1.1 V operating voltage
  • 288-pin 2Rx4 form factor for ThinkMate SuperServer 111C-NR and 121C-TN10R compatibility

Specifikationer

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Spørgsmål om denne vare

Will the 288-pin DDR5 RDIMM modules fit the memory slots on my THINKMATE Supermicro SuperServer 111C-NR?

Yes, each 64 GB module uses the standard 288-pin DDR5 RDIMM form factor required by the 111C-NR and the 121C-TN2R or 121C-TN10R platforms.

What is the correct way to populate the four 64 GB sticks, and which step do builders often miss?

Install all four modules in the slots specified by the server manual for a quad-channel configuration; the step often missed is fully seating each RDIMM until both ejector clips click locked.

How can I tell if one of the 2Rx4 ECC registered modules needs replacement later?

The server will log corrected ECC errors or report uncorrectable faults for a specific DIMM slot; swap the indicated 64 GB stick when the firmware flags it.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.