Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Four green DDR5 RDIMM sticks in anti-static tray

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 4800 ECC RDIMM CL40 1.1V 2Rx4 THINKMATE Compatible memory upgrade

SKU CH-R16A-KA95J

256GB registered DDR5 ECC kit with four 64GB modules at 4800MT/s CL40 for ThinkMate Supermicro servers

  • Capacity256GB (4 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 256 GB total capacity with four 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for data integrity
  • CL40 latency at 1.1 V operating voltage
  • 288-pin 2Rx4 form factor for ThinkMate SuperServer 111C-NR and 121C-TN10R compatibility

256GB DDR5 ECC RDIMM kit

This NEMIX RAM kit provides 256GB of DDR5 memory across four 64GB registered DIMMs. It is built for THINKMATE Supermicro SuperServer platforms that require ECC RDIMM modules for stable operation. The memory runs at 4800MHz with CL40 latency at 1.1V.

Upgrading from lower-capacity RDIMMs

The kit replaces smaller DDR5 RDIMM sets when workloads demand more memory bandwidth and capacity for virtualization or database tasks. The jump is worth it when the server chassis has four available slots and the firmware supports 64GB dual-rank modules at this speed.

Installing four registered modules

Installation follows standard 288-pin DDR5 RDIMM procedure and typically takes minutes per module. Ensure the server BIOS is current and that the memory configuration matches the motherboard population rules for 2Rx4 registered DIMMs. Improper slot order is the most common cause of post failures.

Points forts

  • 256 GB total capacity with four 64 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for data integrity
  • CL40 latency at 1.1 V operating voltage
  • 288-pin 2Rx4 form factor for ThinkMate SuperServer 111C-NR and 121C-TN10R compatibility

Caractéristiques

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content256GB (4X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions sur cet article

Will the 288-pin DDR5 RDIMM modules fit the memory slots on my THINKMATE Supermicro SuperServer 111C-NR?

Yes, each 64 GB module uses the standard 288-pin DDR5 RDIMM form factor required by the 111C-NR and the 121C-TN2R or 121C-TN10R platforms.

What is the correct way to populate the four 64 GB sticks, and which step do builders often miss?

Install all four modules in the slots specified by the server manual for a quad-channel configuration; the step often missed is fully seating each RDIMM until both ejector clips click locked.

How can I tell if one of the 2Rx4 ECC registered modules needs replacement later?

The server will log corrected ECC errors or report uncorrectable faults for a specific DIMM slot; swap the indicated 64 GB stick when the firmware flags it.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.