Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR4 ECC UDIMM sticks in a kit

NEMIX RAM

NEMIX RAM 32GB (2 x 16GB) DDR4 2400MHz ECC UDIMM server RAM

SKU CH-DE6Y-EYCYJ

32 GB dual-channel kit of DDR4 ECC UDIMMs running at 2400 MHz with CL17 latency and 1.2 V operation

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • CAS Latency17
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection guards data integrity in server workloads
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR4 2400 MHz PC4-19200 delivers rated throughput
  • CAS 17 at 1.2 V balances latency and power
  • 288-pin unbuffered UDIMM fits compatible server boards

Kit composition and target systems

This kit provides 32 GB of DDR4 server memory in a matched pair of 16 GB ECC UDIMM modules. It is built for workstations and entry-level servers that require error-correcting unbuffered DIMMs running at 2400 MHz. Buyers who need registered or load-reduced DIMMs cannot use this kit.

Installation notes

Each module uses the standard 288-pin DDR4 UDIMM form factor and operates at 1.2 V, so it fits any compatible DDR4 UDIMM slot without extra power cables. The 2Rx8 organisation means the memory controller must support dual-rank unbuffered ECC; systems limited to single-rank or non-ECC UDIMMs will not post with these modules installed.

Deciding specification

The defining attribute is the combination of ECC and unbuffered operation at DDR4-2400 with a CAS latency of 17. If your platform specifically calls for ECC UDIMMs at this speed and rank configuration, the kit matches; otherwise a different module type is required.

Fordele

  • ECC protection guards data integrity in server workloads
  • 32 GB kit (2 × 16 GB) expands memory capacity
  • DDR4 2400 MHz PC4-19200 delivers rated throughput
  • CAS 17 at 1.2 V balances latency and power
  • 288-pin unbuffered UDIMM fits compatible server boards

Specifikationer

BrandNEMIX RAM
ModelPart#: ME19200-628K2-SM-SYS-5019S-ML
Part NumberPart#: ME19200-628K2-SM-SYS-5019S-ML
Capacity32GB (2 x 16GB)
SpeedDDR4 2400 (PC4 19200)
CAS Latency17
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Spørgsmål om denne vare

How can I verify the kit is running at DDR4 2400 with CL17 after installation?

Check the BIOS memory info or a tool such as CPU-Z; it should show 2400 MT/s, CAS 17, 1.2 V and ECC enabled for both 16 GB modules.

What ships in the box and what must I source separately?

The box contains two 16 GB DDR4 2400 ECC UDIMM modules; no extra cables, brackets or software are included or required.

Should I choose the 2Rx8 32 GB kit or a different capacity for my DDR4 2400 server?

This 32 GB (2 x 16 GB) 2Rx8 kit matches the DDR4 2400 PC4-19200 spec; select it when your board takes unbuffered ECC UDIMMs and you need 32 GB total.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.