NEMIX RAM
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 62.908,99
0.78966911BTC
Op voorraad
NEMIX RAM
NEMIX RAM 32GB (2 x 16GB) DDR4 2400MHz ECC UDIMM server RAM
32 GB dual-channel kit of DDR4 ECC UDIMMs running at 2400 MHz with CL17 latency and 1.2 V operation
- Capacity32GB (2 x 16GB)
- SpeedDDR4 2400 (PC4 19200)
- CAS Latency17
- Voltage1.2V
- ECCYes
- Buffered/RegisteredUnbuffered
- ECC protection guards data integrity in server workloads
- 32 GB kit (2 × 16 GB) expands memory capacity
- DDR4 2400 MHz PC4-19200 delivers rated throughput
- CAS 17 at 1.2 V balances latency and power
- 288-pin unbuffered UDIMM fits compatible server boards
Kit composition and target systems
This kit provides 32 GB of DDR4 server memory in a matched pair of 16 GB ECC UDIMM modules. It is built for workstations and entry-level servers that require error-correcting unbuffered DIMMs running at 2400 MHz. Buyers who need registered or load-reduced DIMMs cannot use this kit.
Installation notes
Each module uses the standard 288-pin DDR4 UDIMM form factor and operates at 1.2 V, so it fits any compatible DDR4 UDIMM slot without extra power cables. The 2Rx8 organisation means the memory controller must support dual-rank unbuffered ECC; systems limited to single-rank or non-ECC UDIMMs will not post with these modules installed.
Deciding specification
The defining attribute is the combination of ECC and unbuffered operation at DDR4-2400 with a CAS latency of 17. If your platform specifically calls for ECC UDIMMs at this speed and rank configuration, the kit matches; otherwise a different module type is required.
Pluspunten
- ECC protection guards data integrity in server workloads
- 32 GB kit (2 × 16 GB) expands memory capacity
- DDR4 2400 MHz PC4-19200 delivers rated throughput
- CAS 17 at 1.2 V balances latency and power
- 288-pin unbuffered UDIMM fits compatible server boards
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: ME19200-628K2-SM-SYS-5019S-ML |
| Part Number | Part#: ME19200-628K2-SM-SYS-5019S-ML |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | 17 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Vragen over dit artikel
How can I verify the kit is running at DDR4 2400 with CL17 after installation?
Check the BIOS memory info or a tool such as CPU-Z; it should show 2400 MT/s, CAS 17, 1.2 V and ECC enabled for both 16 GB modules.
What ships in the box and what must I source separately?
The box contains two 16 GB DDR4 2400 ECC UDIMM modules; no extra cables, brackets or software are included or required.
Should I choose the 2Rx8 32 GB kit or a different capacity for my DDR4 2400 server?
This 32 GB (2 x 16 GB) 2Rx8 kit matches the DDR4 2400 PC4-19200 spec; select it when your board takes unbuffered ECC UDIMMs and you need 32 GB total.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 57.634,99
0.72346689BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 53.038,99
0.66577531BTC
Op voorraad
NEMIX RAM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
US$ 70.395,99
0.88365016BTC
Op voorraad