Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green 204-pin DDR3 SODIMM module with black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz SODIMM POSIFLEX PS-3516 memory upgrade

SKU CH-3V9V-23HVQ

4GB DDR3 1333MHz SODIMM module for POSIFLEX PS-3516 point-of-sale terminals

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX PS-3516 terminals ensuring direct compatibility
  • DDR3 1333MHz speed delivers responsive point-of-sale performance
  • Low 1.35V operation reduces power draw in fanless systems
  • Non-ECC unbuffered 2Rx8 architecture suits standard POS motherboards
  • 204-pin SODIMM form factor fits compact terminal slots

NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX PS-3516

This module is a 4GB DDR3 1333MHz SODIMM built for the POSIFLEX PS-3516 point-of-sale terminal. It uses a 204-pin unbuffered non-ECC design with 2Rx8 organisation. The part targets technicians upgrading memory in that specific fanless POS system.

DDR3 1333MHz PC3-10600 interface limits

The DDR3 1333 standard caps transfer rates at PC3-10600 bandwidth. Systems requiring higher speeds or ECC error correction cannot use this module. Voltage is specified at 1.50V with a 1.35V low-voltage option noted on the label. CL9 latency is fixed by the DDR3 1333 JEDEC profile.

Simple SODIMM installation in a fanless terminal

Installation involves opening the PS-3516 chassis, aligning the 204-pin key, and pressing the module until the side clips lock. The fanless design offers tight internal space, so fingers or tools can slip. A common issue is seating the stick at an angle, which prevents the clips from engaging and leaves the system unbootable.

Fordele

  • Designed for POSIFLEX PS-3516 terminals ensuring direct compatibility
  • DDR3 1333MHz speed delivers responsive point-of-sale performance
  • Low 1.35V operation reduces power draw in fanless systems
  • Non-ECC unbuffered 2Rx8 architecture suits standard POS motherboards
  • 204-pin SODIMM form factor fits compact terminal slots

Specifikationer

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Spørgsmål om denne vare

Should I choose the 4GB module or add a second stick for the POSIFLEX PS-3516?

The module is a single 4GB DDR3 1333MHz SODIMM. Add a second identical stick only if your PS-3516 has a free 204-pin slot and the board supports dual-channel operation.

What does the 1333MHz rating deliver in the PS-3516 terminal?

It sets the maximum data rate at PC3-10600. The system will run at the lowest common speed between this module and any existing memory, so actual throughput matches the slowest installed stick.

Does the 204-pin DDR3 SODIMM interface limit voltage to 1.35V or 1.50V?

The module is specified at 1.35V in the title and 1.50V in the detailed specs. The PS-3516's memory controller will negotiate the supported voltage automatically at boot.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.