저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Green 204-pin DDR3 SODIMM module with black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 4GB DDR3 1333MHz SODIMM POSIFLEX PS-3516 memory upgrade

SKU CH-3V9V-23HVQ

4GB DDR3 1333MHz SODIMM module for POSIFLEX PS-3516 point-of-sale terminals

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX PS-3516 terminals ensuring direct compatibility
  • DDR3 1333MHz speed delivers responsive point-of-sale performance
  • Low 1.35V operation reduces power draw in fanless systems
  • Non-ECC unbuffered 2Rx8 architecture suits standard POS motherboards
  • 204-pin SODIMM form factor fits compact terminal slots

NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX PS-3516

This module is a 4GB DDR3 1333MHz SODIMM built for the POSIFLEX PS-3516 point-of-sale terminal. It uses a 204-pin unbuffered non-ECC design with 2Rx8 organisation. The part targets technicians upgrading memory in that specific fanless POS system.

DDR3 1333MHz PC3-10600 interface limits

The DDR3 1333 standard caps transfer rates at PC3-10600 bandwidth. Systems requiring higher speeds or ECC error correction cannot use this module. Voltage is specified at 1.50V with a 1.35V low-voltage option noted on the label. CL9 latency is fixed by the DDR3 1333 JEDEC profile.

Simple SODIMM installation in a fanless terminal

Installation involves opening the PS-3516 chassis, aligning the 204-pin key, and pressing the module until the side clips lock. The fanless design offers tight internal space, so fingers or tools can slip. A common issue is seating the stick at an angle, which prevents the clips from engaging and leaves the system unbootable.

주요 특징

  • Designed for POSIFLEX PS-3516 terminals ensuring direct compatibility
  • DDR3 1333MHz speed delivers responsive point-of-sale performance
  • Low 1.35V operation reduces power draw in fanless systems
  • Non-ECC unbuffered 2Rx8 architecture suits standard POS motherboards
  • 204-pin SODIMM form factor fits compact terminal slots

사양

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

이 상품에 대한 질문

Should I choose the 4GB module or add a second stick for the POSIFLEX PS-3516?

The module is a single 4GB DDR3 1333MHz SODIMM. Add a second identical stick only if your PS-3516 has a free 204-pin slot and the board supports dual-channel operation.

What does the 1333MHz rating deliver in the PS-3516 terminal?

It sets the maximum data rate at PC3-10600. The system will run at the lowest common speed between this module and any existing memory, so actual throughput matches the slowest installed stick.

Does the 204-pin DDR3 SODIMM interface limit voltage to 1.35V or 1.50V?

The module is specified at 1.35V in the title and 1.50V in the detailed specs. The PS-3516's memory controller will negotiate the supported voltage automatically at boot.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.