SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00498652BTC
Varastossa
NEMIX RAM
NEMIX RAM 4GB DDR3 1333MHz SODIMM POSIFLEX PS-3516 memory upgrade
4GB DDR3 1333MHz SODIMM module for POSIFLEX PS-3516 point-of-sale terminals
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX PS-3516 terminals ensuring direct compatibility
- DDR3 1333MHz speed delivers responsive point-of-sale performance
- Low 1.35V operation reduces power draw in fanless systems
- Non-ECC unbuffered 2Rx8 architecture suits standard POS motherboards
- 204-pin SODIMM form factor fits compact terminal slots
NEMIX RAM 4GB DDR3 SODIMM for POSIFLEX PS-3516
This module is a 4GB DDR3 1333MHz SODIMM built for the POSIFLEX PS-3516 point-of-sale terminal. It uses a 204-pin unbuffered non-ECC design with 2Rx8 organisation. The part targets technicians upgrading memory in that specific fanless POS system.
DDR3 1333MHz PC3-10600 interface limits
The DDR3 1333 standard caps transfer rates at PC3-10600 bandwidth. Systems requiring higher speeds or ECC error correction cannot use this module. Voltage is specified at 1.50V with a 1.35V low-voltage option noted on the label. CL9 latency is fixed by the DDR3 1333 JEDEC profile.
Simple SODIMM installation in a fanless terminal
Installation involves opening the PS-3516 chassis, aligning the 204-pin key, and pressing the module until the side clips lock. The fanless design offers tight internal space, so fingers or tools can slip. A common issue is seating the stick at an angle, which prevents the clips from engaging and leaves the system unbootable.
Kohokohdat
- Designed for POSIFLEX PS-3516 terminals ensuring direct compatibility
- DDR3 1333MHz speed delivers responsive point-of-sale performance
- Low 1.35V operation reduces power draw in fanless systems
- Non-ECC unbuffered 2Rx8 architecture suits standard POS motherboards
- 204-pin SODIMM form factor fits compact terminal slots
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Kysymyksiä tästä tuotteesta
Should I choose the 4GB module or add a second stick for the POSIFLEX PS-3516?
The module is a single 4GB DDR3 1333MHz SODIMM. Add a second identical stick only if your PS-3516 has a free 204-pin slot and the board supports dual-channel operation.
What does the 1333MHz rating deliver in the PS-3516 terminal?
It sets the maximum data rate at PC3-10600. The system will run at the lowest common speed between this module and any existing memory, so actual throughput matches the slowest installed stick.
Does the 204-pin DDR3 SODIMM interface limit voltage to 1.35V or 1.50V?
The module is specified at 1.35V in the title and 1.50V in the detailed specs. The PS-3516's memory controller will negotiate the supported voltage automatically at boot.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 $
0.00095395BTC
Varastossa