Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR4 UDIMM sticks, no heat spreaders, 288-pin, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 2Rx8 UDIMM memory upgrade

SKU CH-Y9BH-Z7F6C

64 GB dual-channel DDR4-3200 kit with CL22 latency, 1.2 V operation and 288-pin UDIMM form factor validated for Supermicro SYS-530AD-I workstations

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB capacity for demanding workloads using two 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 for fast data throughput
  • CL22 latency at 1.20 V for efficient operation
  • 2Rx8 dual-rank 288-pin UDIMM layout for broad motherboard compatibility
  • Validated for Supermicro SYS-530AD-I workstation systems

64 GB DDR4 3200 Kit for Supermicro Workstations

This 64 GB kit contains two 32 GB DDR4 3200 modules built for Supermicro desktop and SuperWorkstation systems. The PC4-25600 UDIMMs run at 1.2 V with CL22 timing and use a 2Rx8 organisation. They are non-ECC, unbuffered, and have no heat spreader. The kit is validated for the SYS-530AD-I platform.

Who this suits and who should look elsewhere

System builders upgrading a compatible Supermicro workstation or desktop will find the correct density and speed here. Buyers who need ECC error correction, registered modules, or a different pin count should look elsewhere. The kit also does not suit laptops, small-form-factor boards using SO-DIMMs, or any platform that requires DDR5 memory.

Key specification: 288-pin DDR4 UDIMM

The 288-pin DDR4 UDIMM form factor is the single detail that decides fit. If the motherboard accepts 288-pin DDR4 unbuffered non-ECC UDIMMs at 3200 MT/s, this kit will install. If the board uses a different pin layout, DDR generation, or requires ECC or registered memory, the modules will not work.

Fordele

  • 64 GB capacity for demanding workloads using two 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 for fast data throughput
  • CL22 latency at 1.20 V for efficient operation
  • 2Rx8 dual-rank 288-pin UDIMM layout for broad motherboard compatibility
  • Validated for Supermicro SYS-530AD-I workstation systems

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Spørgsmål om denne vare

Will the 3200 MHz DDR4 modules run at their rated speed on a Supermicro SYS-530AD-I workstation?

This kit is built for the Supermicro SYS-530AD-I and runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V.

How can I verify the 2Rx8 dual-rank configuration is recognised after installation?

The BIOS or OS memory information will show 64 GB total across two 32 GB modules, each reported as 2Rx8 at 3200 MT/s.

Does the package include only the two UDIMM modules or any extra accessories?

The box contains the 64 GB (2 × 32 GB) DDR4 3200 UDIMM kit and nothing else.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.