Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two green DDR4 UDIMM sticks, no heat spreaders, 288-pin, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 2Rx8 UDIMM memory upgrade

SKU CH-Y9BH-Z7F6C

64 GB dual-channel DDR4-3200 kit with CL22 latency, 1.2 V operation and 288-pin UDIMM form factor validated for Supermicro SYS-530AD-I workstations

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB capacity for demanding workloads using two 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 for fast data throughput
  • CL22 latency at 1.20 V for efficient operation
  • 2Rx8 dual-rank 288-pin UDIMM layout for broad motherboard compatibility
  • Validated for Supermicro SYS-530AD-I workstation systems

64 GB DDR4 3200 Kit for Supermicro Workstations

This 64 GB kit contains two 32 GB DDR4 3200 modules built for Supermicro desktop and SuperWorkstation systems. The PC4-25600 UDIMMs run at 1.2 V with CL22 timing and use a 2Rx8 organisation. They are non-ECC, unbuffered, and have no heat spreader. The kit is validated for the SYS-530AD-I platform.

Who this suits and who should look elsewhere

System builders upgrading a compatible Supermicro workstation or desktop will find the correct density and speed here. Buyers who need ECC error correction, registered modules, or a different pin count should look elsewhere. The kit also does not suit laptops, small-form-factor boards using SO-DIMMs, or any platform that requires DDR5 memory.

Key specification: 288-pin DDR4 UDIMM

The 288-pin DDR4 UDIMM form factor is the single detail that decides fit. If the motherboard accepts 288-pin DDR4 unbuffered non-ECC UDIMMs at 3200 MT/s, this kit will install. If the board uses a different pin layout, DDR generation, or requires ECC or registered memory, the modules will not work.

Pluspunten

  • 64 GB capacity for demanding workloads using two 32 GB modules
  • DDR4 3200 speed rated at PC4-25600 for fast data throughput
  • CL22 latency at 1.20 V for efficient operation
  • 2Rx8 dual-rank 288-pin UDIMM layout for broad motherboard compatibility
  • Validated for Supermicro SYS-530AD-I workstation systems

Specificaties

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT

Vragen over dit artikel

Will the 3200 MHz DDR4 modules run at their rated speed on a Supermicro SYS-530AD-I workstation?

This kit is built for the Supermicro SYS-530AD-I and runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V.

How can I verify the 2Rx8 dual-rank configuration is recognised after installation?

The BIOS or OS memory information will show 64 GB total across two 32 GB modules, each reported as 2Rx8 at 3200 MT/s.

Does the package include only the two UDIMM modules or any extra accessories?

The box contains the 64 GB (2 × 32 GB) DDR4 3200 UDIMM kit and nothing else.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.