Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green 240-pin DDR3L RDIMM modules without heat spreaders

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 ECC Registered RDIMM 1.35V

SKU CH-X9B7-RD9ZA

ECC registered DDR3L 1600 kit adds 16 GB across two 8 GB RDIMMs for compatible Supermicro X9 workstation and server boards

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 speed matches Supermicro X9DR series specs
  • Low 1.35 V voltage reduces power draw in dense configs
  • Two 8 GB modules give 16 GB total capacity
  • 240-pin RDIMM form factor fits listed workstation boards

OWC 16GB DDR3L ECC RDIMM Kit

This OWC kit supplies 16GB of DDR3L ECC registered memory in a matched pair of 8GB modules. It is built for workstations and servers that require 240-pin DDR3L RDIMMs with error correction. Standard desktop boards cannot use this memory, and it must not be mixed with unbuffered DIMMs.

240-Pin Registered Design and 1.35V Operation

Each module uses a 240-pin RDIMM form factor with a registered buffer that reduces electrical load on the memory controller. The DDR3L rating allows operation at 1.35V, lowering power draw compared to standard DDR3. No heat spreader is fitted, so airflow in the chassis handles cooling directly.

Replaces Supermicro MEMDR380L Series Modules

This kit replaces Supermicro part numbers MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16. It suits Supermicro X9DRFF, X9DRFR, X9DRG, X9DRH and X9DRi motherboards. Builders needing unbuffered memory or consumer desktop DIMMs should look elsewhere.

Fordele

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 speed matches Supermicro X9DR series specs
  • Low 1.35 V voltage reduces power draw in dense configs
  • Two 8 GB modules give 16 GB total capacity
  • 240-pin RDIMM form factor fits listed workstation boards

Specifikationer

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DRFF Series
Supermicro Motherboard X9DRFR Series
Supermicro Motherboard X9DRG Series
Supermicro Motherboard X9DRH Series
Supermicro Motherboard X9DRi Series

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What speed does the DDR3L 1600 interface actually run at?

The kit operates at DDR3L 1600 (PC3L-12800) with a CAS latency of CL11.

Will these 240-pin RDIMMs fit in a standard desktop motherboard?

No, they are registered ECC modules designed for Supermicro X9DR series server and workstation boards only.

How do I install the two 8 GB sticks correctly?

Populate matching memory channels on the X9DR board; do not mix these registered DIMMs with unbuffered memory.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.