Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 ECC Registered RDIMM 1.35V

SKU CH-X9B7-RD9ZA

ECC registered DDR3L 1600 kit adds 16 GB across two 8 GB RDIMMs for compatible Supermicro X9 workstation and server boards

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3L ECC RDIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 speed matches Supermicro X9DR series specs
  • Low 1.35 V voltage reduces power draw in dense configs
  • Two 8 GB modules give 16 GB total capacity
  • 240-pin RDIMM form factor fits listed workstation boards

OWC 16GB DDR3L ECC RDIMM Kit

This OWC kit supplies 16GB of DDR3L ECC registered memory in a matched pair of 8GB modules. It is built for workstations and servers that require 240-pin DDR3L RDIMMs with error correction. Standard desktop boards cannot use this memory, and it must not be mixed with unbuffered DIMMs.

240-Pin Registered Design and 1.35V Operation

Each module uses a 240-pin RDIMM form factor with a registered buffer that reduces electrical load on the memory controller. The DDR3L rating allows operation at 1.35V, lowering power draw compared to standard DDR3. No heat spreader is fitted, so airflow in the chassis handles cooling directly.

Replaces Supermicro MEMDR380L Series Modules

This kit replaces Supermicro part numbers MEMDR380LHL07ER16, MEMDR380LSL10ER16, MEMDR380LSL14ER16 and MEMDR380LSV04ER16. It suits Supermicro X9DRFF, X9DRFR, X9DRG, X9DRH and X9DRi motherboards. Builders needing unbuffered memory or consumer desktop DIMMs should look elsewhere.

Punti di forza

  • ECC registered design protects data integrity in servers
  • DDR3L 1600 CL11 speed matches Supermicro X9DR series specs
  • Low 1.35 V voltage reduces power draw in dense configs
  • Two 8 GB modules give 16 GB total capacity
  • 240-pin RDIMM form factor fits listed workstation boards

Caratteristiche tecniche

BrandOWC
Part Number1R6T31R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3L ECC RDIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X9DRFF Series
Supermicro Motherboard X9DRFR Series
Supermicro Motherboard X9DRG Series
Supermicro Motherboard X9DRH Series
Supermicro Motherboard X9DRi Series

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

What speed does the DDR3L 1600 interface actually run at?

The kit operates at DDR3L 1600 (PC3L-12800) with a CAS latency of CL11.

Will these 240-pin RDIMMs fit in a standard desktop motherboard?

No, they are registered ECC modules designed for Supermicro X9DR series server and workstation boards only.

How do I install the two 8 GB sticks correctly?

Populate matching memory channels on the X9DR board; do not mix these registered DIMMs with unbuffered memory.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.