Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green rectangular DDR3 memory module with gold contacts and black chips on both sides

OWC

OWC 1U6D32R808GB 8GB DDR3 1600 PC3-12800 CL11 2Rx8 240-pin 1.5V Non-ECC UDIMM memory upgrade

SKU CH-VWQJ-3PD9Q

An 8 GB DDR3-1600 UDIMM upgrade for HP EliteDesk 700 G1, 705 G1 and 705 G2 systems

  • Capacity8GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Ready for HP EliteDesk 700 G1 and 705 G1 systems
  • 8GB DDR3 1600 PC3-12800 CL11 single module
  • 5V non-ECC unbuffered 240-pin UDIMM
  • JEDEC and RoHS compliant warranty-safe upgrade
  • Easy DIY install boosts multitasking responsiveness

HP EliteDesk DDR3 upgrade

This 8GB DDR3 1600 module is built for HP EliteDesk 700 G1 SFF, 700 G1 Tower, 705 G1 SFF, 705 G1 Tower and 705 G2 SFF systems. It adds a single 240-pin UDIMM rated at PC3-12800 CL11 to expand memory capacity for everyday workloads.

Thermals, noise and power

The unbuffered non-ECC DIMM runs at the standard 1.5V JEDEC voltage without a heat spreader, so it draws minimal power and adds no audible noise to the chassis. Power consumption stays within the platform's default memory budget during normal operation.

Replaces smaller DDR3 DIMMs

Swapping a 4GB or 2GB stick for this 8GB module doubles or quadruples capacity, letting the EliteDesk keep more applications and larger files in memory at once. The jump is worth it when the current configuration forces frequent paging or limits multitasking headroom.

Fordele

  • Ready for HP EliteDesk 700 G1 and 705 G1 systems
  • 8GB DDR3 1600 PC3-12800 CL11 single module
  • 5V non-ECC unbuffered 240-pin UDIMM
  • JEDEC and RoHS compliant warranty-safe upgrade
  • Easy DIY install boosts multitasking responsiveness

Specifikationer

BrandOWC
Part Number1U6D32R808GB
Capacity8GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP EliteDesk 700 G1 SFF
HP EliteDesk 700 G1 Tower
HP EliteDesk 705 G1 SFF
HP EliteDesk 705 G1 Tower
HP EliteDesk 705 G2 SFF

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How do I install the 240-pin DDR3 UDIMM in my HP EliteDesk 700 G1 SFF, and what step is often missed?

Power off, unplug, open the case, align the notch on the 240-pin DDR3 module with the slot key, press firmly until both retention clips click shut, then power on and verify 8GB appears in BIOS — the step often missed is fully seating both clips.

What maintenance or replacement will this 8GB DDR3 1600 CL11 module need over time?

No scheduled maintenance is required; keep interior dust-free and ensure the 1.5V DIMM stays firmly seated — replacement is only needed if a memory test reports errors or capacity becomes insufficient.

What limit appears first when this 2Rx8 PC3-12800 kit runs sustained workloads?

The CL11 latency at 1600 MT/s sets the throughput ceiling; sustained heavy use will hit that bandwidth limit before thermal or voltage constraints become an issue.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.