Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green rectangular DDR3 memory module with gold contacts and black chips on both sides

OWC

OWC 1U6D32R808GB 8GB DDR3 1600 PC3-12800 CL11 2Rx8 240-pin 1.5V Non-ECC UDIMM memory upgrade

SKU CH-VWQJ-3PD9Q

An 8 GB DDR3-1600 UDIMM upgrade for HP EliteDesk 700 G1, 705 G1 and 705 G2 systems

  • Capacity8GB
  • Type240-Pin DDR3 Non-ECC UDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCNo
  • Ready for HP EliteDesk 700 G1 and 705 G1 systems
  • 8GB DDR3 1600 PC3-12800 CL11 single module
  • 5V non-ECC unbuffered 240-pin UDIMM
  • JEDEC and RoHS compliant warranty-safe upgrade
  • Easy DIY install boosts multitasking responsiveness

HP EliteDesk DDR3 upgrade

This 8GB DDR3 1600 module is built for HP EliteDesk 700 G1 SFF, 700 G1 Tower, 705 G1 SFF, 705 G1 Tower and 705 G2 SFF systems. It adds a single 240-pin UDIMM rated at PC3-12800 CL11 to expand memory capacity for everyday workloads.

Thermals, noise and power

The unbuffered non-ECC DIMM runs at the standard 1.5V JEDEC voltage without a heat spreader, so it draws minimal power and adds no audible noise to the chassis. Power consumption stays within the platform's default memory budget during normal operation.

Replaces smaller DDR3 DIMMs

Swapping a 4GB or 2GB stick for this 8GB module doubles or quadruples capacity, letting the EliteDesk keep more applications and larger files in memory at once. The jump is worth it when the current configuration forces frequent paging or limits multitasking headroom.

Prednosti

  • Ready for HP EliteDesk 700 G1 and 705 G1 systems
  • 8GB DDR3 1600 PC3-12800 CL11 single module
  • 5V non-ECC unbuffered 240-pin UDIMM
  • JEDEC and RoHS compliant warranty-safe upgrade
  • Easy DIY install boosts multitasking responsiveness

Špecifikácie

BrandOWC
Part Number1U6D32R808GB
Capacity8GB
Type240-Pin DDR3 Non-ECC UDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemHP EliteDesk 700 G1 SFF
HP EliteDesk 700 G1 Tower
HP EliteDesk 705 G1 SFF
HP EliteDesk 705 G1 Tower
HP EliteDesk 705 G2 SFF

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

How do I install the 240-pin DDR3 UDIMM in my HP EliteDesk 700 G1 SFF, and what step is often missed?

Power off, unplug, open the case, align the notch on the 240-pin DDR3 module with the slot key, press firmly until both retention clips click shut, then power on and verify 8GB appears in BIOS — the step often missed is fully seating both clips.

What maintenance or replacement will this 8GB DDR3 1600 CL11 module need over time?

No scheduled maintenance is required; keep interior dust-free and ensure the 1.5V DIMM stays firmly seated — replacement is only needed if a memory test reports errors or capacity becomes insufficient.

What limit appears first when this 2Rx8 PC3-12800 kit runs sustained workloads?

The CL11 latency at 1600 MT/s sets the throughput ceiling; sustained heavy use will hit that bandwidth limit before thermal or voltage constraints become an issue.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.