Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green circuit board with M.2 slot and U.2 cable attached

Syba

Syba SI-ADA40123 M.2 PCIe NVMe SSD to U.2 (SFF-8639) 2.5-Inch Adapter expansion card

SKU CH-KY4H-A4ZBM MPN SI-ADA40123

Converts an M.2 NVMe SSD to a 2.5-inch U.2 drive with SFF-8643 cable, PCIe 3.0 and NVM Express 1.2a support

  • TypeM.2 PCIe I/F NVMe SSD to U.2 (SFF-8639)
  • Operating Systems SupportedWindows 7/8/8.1/10 64-Bit, UEFI 2.3.1 or later
  • SpecificationsBuilt in M.2 M-Key Recep5cal Connector PCI Express Base Spec
  • FeaturesThis M.2 adapter turns a regular M.2 SSD drive into a U.2 SS
  • Package Contents1 x Adapter 1 x Copper Nut 1 x M3x3 Screw, M3x5 Screw 2 x Wa
  • Converts M.2 NVMe SSD to U.2 2.5-inch form factor for SFF-8639 bay compatibility
  • PCIe 3.0 and NVMe 1.2a support maintains full drive performance through the adapter
  • Built-in short-circuit and thermal-shutdown protection safeguards the SSD during operation
  • Supports Windows 7, 8, 8.1 and 10 64-bit with UEFI 2.3.1 or later
  • Includes SFF-8643 to U.2 cable and mounting hardware for immediate installation

M.2 NVMe to U.2 adapter card

This Syba adapter converts an M.2 M-key NVMe SSD into a 2.5-inch U.2 form factor. It targets builders who want to install an M.2 drive into a system bay or backplane that only accepts SFF-8639 connectors. The card supports PCI Express 3.0 and NVM Express 1.2a specifications. Operating system compatibility covers Windows 7 through 10 64-bit with UEFI 2.3.1 or later.

Capacity and headroom

The adapter passes through the full performance of the installed M.2 NVMe drive without adding latency or bandwidth limits of its own. Maximum output current is rated at 3.3 volts and 5 amps, which accommodates most consumer and client SSDs. Short-circuit and thermal-shutdown protection circuits guard the drive and host against fault conditions. Builders needing higher power delivery or enterprise-grade power-loss protection should look elsewhere.

Bundled hardware

The package includes the adapter PCB, a copper mounting nut, two M3 screws of different lengths, two washers, and a SFF-8643 to U.2 adapter cable. These parts provide everything required to secure the M.2 drive onto the board and connect the assembly to a SFF-8643 port on a motherboard or HBA. No driver disc or management software is supplied.

Fordele

  • Converts M.2 NVMe SSD to U.2 2.5-inch form factor for SFF-8639 bay compatibility
  • PCIe 3.0 and NVMe 1.2a support maintains full drive performance through the adapter
  • Built-in short-circuit and thermal-shutdown protection safeguards the SSD during operation
  • Supports Windows 7, 8, 8.1 and 10 64-bit with UEFI 2.3.1 or later
  • Includes SFF-8643 to U.2 cable and mounting hardware for immediate installation

Specifikationer

BrandSYBA
ModelSI-ADA40123
TypeM.2 PCIe I/F NVMe SSD to U.2 (SFF-8639)
Operating Systems SupportedWindows 7/8/8.1/10 64-Bit, UEFI 2.3.1 or later
SpecificationsBuilt in M.2 M-Key Recep5cal Connector
PCI Express Base Specifica5on Rev 3.0
NVM Express 1.2a
3.3v, 5A maximum output current
Short Circuit Protec5on
Thermal Shutdown Protec5on
Windows 7/8/8.1/10 64-Bit
FeaturesThis M.2 adapter turns a regular M.2 SSD drive into a U.2 SSD. The drive can then connect to SFF-8643 connector in the system via a SFF-8639 to U.2 cable, resulting in a drive with the same performance as it would be if it had been installed on a PCIe slot.
Package Contents1 x Adapter
1 x Copper Nut
1 x M3x3 Screw, M3x5 Screw
2 x Washers
1 x SFF-8643 to U.2 Adapter Cable
Forsendelsesvægt0.15 kg
Pakkestørrelse282 × 175 × 3 mm

Spørgsmål om denne vare

Will an M.2 NVMe SSD on this SI-ADA40123 adapter work with my older PCIe 3.0 motherboard slot?

Yes, the adapter uses PCI Express Base Specification Rev 3.0, so it runs at PCIe 3.0 speeds when installed in a compatible motherboard slot.

How can I confirm the adapter is functioning correctly after installing the SSD and connecting the cable?

The SSD should appear in UEFI 2.3.1 or later firmware and be recognised by Windows 7, 8, 8.1 or 10 64-Bit without additional drivers.

Does the package include the M.2 mounting screw and the SFF-8643 to U.2 cable, or must I buy them separately?

The box contains the adapter, a copper nut, M3x3 and M3x5 screws, two washers, and one SFF-8643 to U.2 adapter cable.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.