BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Syba
Converts an M.2 NVMe SSD to a 2.5-inch U.2 drive with SFF-8643 cable, PCIe 3.0 and NVM Express 1.2a support
This Syba adapter converts an M.2 M-key NVMe SSD into a 2.5-inch U.2 form factor. It targets builders who want to install an M.2 drive into a system bay or backplane that only accepts SFF-8639 connectors. The card supports PCI Express 3.0 and NVM Express 1.2a specifications. Operating system compatibility covers Windows 7 through 10 64-bit with UEFI 2.3.1 or later.
The adapter passes through the full performance of the installed M.2 NVMe drive without adding latency or bandwidth limits of its own. Maximum output current is rated at 3.3 volts and 5 amps, which accommodates most consumer and client SSDs. Short-circuit and thermal-shutdown protection circuits guard the drive and host against fault conditions. Builders needing higher power delivery or enterprise-grade power-loss protection should look elsewhere.
The package includes the adapter PCB, a copper mounting nut, two M3 screws of different lengths, two washers, and a SFF-8643 to U.2 adapter cable. These parts provide everything required to secure the M.2 drive onto the board and connect the assembly to a SFF-8643 port on a motherboard or HBA. No driver disc or management software is supplied.
| Brand | SYBA |
|---|---|
| Model | SI-ADA40123 |
| Type | M.2 PCIe I/F NVMe SSD to U.2 (SFF-8639) |
| Operating Systems Supported | Windows 7/8/8.1/10 64-Bit, UEFI 2.3.1 or later |
| Specifications | Built in M.2 M-Key Recep5cal Connector PCI Express Base Specifica5on Rev 3.0 NVM Express 1.2a 3.3v, 5A maximum output current Short Circuit Protec5on Thermal Shutdown Protec5on Windows 7/8/8.1/10 64-Bit |
| Features | This M.2 adapter turns a regular M.2 SSD drive into a U.2 SSD. The drive can then connect to SFF-8643 connector in the system via a SFF-8639 to U.2 cable, resulting in a drive with the same performance as it would be if it had been installed on a PCIe slot. |
| Package Contents | 1 x Adapter 1 x Copper Nut 1 x M3x3 Screw, M3x5 Screw 2 x Washers 1 x SFF-8643 to U.2 Adapter Cable |
| 出貨重量 | 0.15 kg |
| 包裝尺寸 | 282 × 175 × 3 mm |
Yes, the adapter uses PCI Express Base Specification Rev 3.0, so it runs at PCIe 3.0 speeds when installed in a compatible motherboard slot.
The SSD should appear in UEFI 2.3.1 or later firmware and be recognised by Windows 7, 8, 8.1 or 10 64-Bit without additional drivers.
The box contains the adapter, a copper nut, M3x3 and M3x5 screws, two washers, and one SFF-8643 to U.2 adapter cable.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?