Ubiquiti Networks UP-Sense Protect All-In-One Sensor
- Protect All-In-One…
- No
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
Ubiquiti Networks
A weatherproof LED floodlight delivering 550 lumens with motion detection, powered and connected via PoE for UniFi Protect integration
Option UP-Floodlight
The Ubiquiti Protect Floodlight delivers 550 lumens of LED output and connects through a 10/100 MbE RJ45 port with PoE. It mounts on a wall and carries an IPx5 weatherproof rating for outdoor exposure. The unit runs on a 24 Kc MIPS processor at 650 MHz with 64 MB DDR2 memory and is managed through the UniFi Protect interface.
Buyers already running UniFi Protect who want motion-activated illumination for driveways or entryways will find it fits directly. Those without a UniFi Protect deployment or who require a camera sensor with night vision should look elsewhere. The device has no micro SD slot, no wireless capability and no pan, tilt or zoom functions.
Power arrives over 802.3 af PoE so no separate supply is needed. A flat wall mount and an angle mount are supplied, both made of plastic. A factory reset button and Bluetooth 4.0 radio are present for initial setup. Maximum power draw is 10.5 W.
| Brand | Ubiquiti |
|---|---|
| Model | UP-FloodLight |
| Camera Type | Flood Light |
| Network Camera | No |
| Type | Flood Light |
| Connection Type | 10/100 MbE RJ45 port |
| Mounting Location | Yes |
| Micro SD Slot | No |
| Wireless | No |
| Wireless Standard | No |
| Ports | 10/100 MbE RJ45 port |
| Pan/Tilt | N/A |
| Pan/Tilt/Zoom | N/A |
| Sensor & Detector | N/A |
| Night Vision | N/A |
| Audio | N/A |
| Power over Ethernet | Yes |
| Power | PoE |
| Humidity | 20 to 80% noncondensing |
| Temperature | -10 to 45° C (14 to 113° F) |
| Dimension | 135 x 65 x 50 mm (5.3 x 2.6 x 2") |
| Weight | Without mount: 216 g (7.6 oz) With flat wall mount: 236 g (8.3 oz) With angle mount: 273 g (9.6 oz) |
| Forsendelsesvægt | 0.30 kg |
| Pakkestørrelse | 135 × 65 × 50 mm |
Andre versioner af denne model
Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.
The floodlight requires 802.3 af PoE, so you must supply 48 V DC at 0.22 A through the RJ45 port using a compliant injector or switch.
Yes, the management interface is UniFi Protect, so the floodlight appears alongside cameras in the same controller.
The RGB status LED shows boot and connection state, and the 550 lumen LED array activates when the motion detector triggers.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ingen sprog matcher.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?