نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Rectangular white floodlight housing with integrated LED panel and Ethernet port, wall-mount brackets included

Ubiquiti Networks

Ubiquiti Protect Floodlight UP-FloodLight 550 lumens PoE

SKU CH-1AK7-3A1VG

A weatherproof LED floodlight delivering 550 lumens with motion detection, powered and connected via PoE for UniFi Protect integration

  • Camera TypeFlood Light
  • Network CameraNo
  • TypeFlood Light
  • Connection Type10/100 MbE RJ45 port
  • Mounting LocationYes
  • Micro SD SlotNo

Option UP-Floodlight

  • Bright 550 lumen LED light for clear visibility
  • Motion-triggered activation detects movement automatically
  • Powered and connected through single PoE cable
  • Weatherproof IPx5 rated for outdoor exposed mounting
  • Managed via UniFi Protect interface for simple control

Bright floodlight for UniFi Protect

The Ubiquiti Protect Floodlight delivers 550 lumens of LED output and connects through a 10/100 MbE RJ45 port with PoE. It mounts on a wall and carries an IPx5 weatherproof rating for outdoor exposure. The unit runs on a 24 Kc MIPS processor at 650 MHz with 64 MB DDR2 memory and is managed through the UniFi Protect interface.

Suits UniFi Protect users needing triggered lighting

Buyers already running UniFi Protect who want motion-activated illumination for driveways or entryways will find it fits directly. Those without a UniFi Protect deployment or who require a camera sensor with night vision should look elsewhere. The device has no micro SD slot, no wireless capability and no pan, tilt or zoom functions.

PoE power and mounting hardware included

Power arrives over 802.3 af PoE so no separate supply is needed. A flat wall mount and an angle mount are supplied, both made of plastic. A factory reset button and Bluetooth 4.0 radio are present for initial setup. Maximum power draw is 10.5 W.

أبرز المميزات

  • Bright 550 lumen LED light for clear visibility
  • Motion-triggered activation detects movement automatically
  • Powered and connected through single PoE cable
  • Weatherproof IPx5 rated for outdoor exposed mounting
  • Managed via UniFi Protect interface for simple control

المواصفات

BrandUbiquiti
ModelUP-FloodLight
Camera TypeFlood Light
Network CameraNo
TypeFlood Light
Connection Type10/100 MbE RJ45 port
Mounting LocationYes
Micro SD SlotNo
WirelessNo
Wireless StandardNo
Ports10/100 MbE RJ45 port
Pan/TiltN/A
Pan/Tilt/ZoomN/A
Sensor & DetectorN/A
Night VisionN/A
AudioN/A
Power over EthernetYes
PowerPoE
Humidity20 to 80% noncondensing
Temperature-10 to 45° C (14 to 113° F)
Dimension135 x 65 x 50 mm (5.3 x 2.6 x 2")
WeightWithout mount: 216 g (7.6 oz)
With flat wall mount: 236 g (8.3 oz)
With angle mount: 273 g (9.6 oz)
وزن الشحنة0.30 kg
أبعاد الطرد135 × 65 × 50 mm

إصدارات أخرى من هذا الطراز

1 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Do I need a PoE injector or a PoE switch to power the UP-FloodLight?

The floodlight requires 802.3 af PoE, so you must supply 48 V DC at 0.22 A through the RJ45 port using a compliant injector or switch.

Can I manage the UP-FloodLight through the same UniFi Protect console that runs my G3 cameras?

Yes, the management interface is UniFi Protect, so the floodlight appears alongside cameras in the same controller.

How can I confirm the unit is operating correctly once it is mounted and powered?

The RGB status LED shows boot and connection state, and the 550 lumen LED array activates when the motion detector triggers.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.