Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa

Ubiquiti Networks

Ubiquiti Protect Floodlight UP-FloodLight 550 lumens PoE

SKU CH-1AK7-3A1VG

A weatherproof LED floodlight delivering 550 lumens with motion detection, powered and connected via PoE for UniFi Protect integration

  • Camera TypeFlood Light
  • Network CameraNo
  • TypeFlood Light
  • Connection Type10/100 MbE RJ45 port
  • Mounting LocationYes
  • Micro SD SlotNo

Option UP-Floodlight

  • Bright 550 lumen LED light for clear visibility
  • Motion-triggered activation detects movement automatically
  • Powered and connected through single PoE cable
  • Weatherproof IPx5 rated for outdoor exposed mounting
  • Managed via UniFi Protect interface for simple control

Bright floodlight for UniFi Protect

The Ubiquiti Protect Floodlight delivers 550 lumens of LED output and connects through a 10/100 MbE RJ45 port with PoE. It mounts on a wall and carries an IPx5 weatherproof rating for outdoor exposure. The unit runs on a 24 Kc MIPS processor at 650 MHz with 64 MB DDR2 memory and is managed through the UniFi Protect interface.

Suits UniFi Protect users needing triggered lighting

Buyers already running UniFi Protect who want motion-activated illumination for driveways or entryways will find it fits directly. Those without a UniFi Protect deployment or who require a camera sensor with night vision should look elsewhere. The device has no micro SD slot, no wireless capability and no pan, tilt or zoom functions.

PoE power and mounting hardware included

Power arrives over 802.3 af PoE so no separate supply is needed. A flat wall mount and an angle mount are supplied, both made of plastic. A factory reset button and Bluetooth 4.0 radio are present for initial setup. Maximum power draw is 10.5 W.

Prednosti

  • Bright 550 lumen LED light for clear visibility
  • Motion-triggered activation detects movement automatically
  • Powered and connected through single PoE cable
  • Weatherproof IPx5 rated for outdoor exposed mounting
  • Managed via UniFi Protect interface for simple control

Špecifikácie

BrandUbiquiti
ModelUP-FloodLight
Camera TypeFlood Light
Network CameraNo
TypeFlood Light
Connection Type10/100 MbE RJ45 port
Mounting LocationYes
Micro SD SlotNo
WirelessNo
Wireless StandardNo
Ports10/100 MbE RJ45 port
Pan/TiltN/A
Pan/Tilt/ZoomN/A
Sensor & DetectorN/A
Night VisionN/A
AudioN/A
Power over EthernetYes
PowerPoE
Humidity20 to 80% noncondensing
Temperature-10 to 45° C (14 to 113° F)
Dimension135 x 65 x 50 mm (5.3 x 2.6 x 2")
WeightWithout mount: 216 g (7.6 oz)
With flat wall mount: 236 g (8.3 oz)
With angle mount: 273 g (9.6 oz)
Prepravná hmotnosť0.30 kg
Rozmery balenia135 × 65 × 50 mm

Ďalšie verzie tohto modelu

Ďalších 1 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Do I need a PoE injector or a PoE switch to power the UP-FloodLight?

The floodlight requires 802.3 af PoE, so you must supply 48 V DC at 0.22 A through the RJ45 port using a compliant injector or switch.

Can I manage the UP-FloodLight through the same UniFi Protect console that runs my G3 cameras?

Yes, the management interface is UniFi Protect, so the floodlight appears alongside cameras in the same controller.

How can I confirm the unit is operating correctly once it is mounted and powered?

The RGB status LED shows boot and connection state, and the 550 lumen LED array activates when the motion detector triggers.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.