Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green DDR4 LRDIMM sticks in anti-static bags

A-Tech

A-Tech 1TB (8x128GB) DDR4 2933 ECC LRDIMM 4Rx4 Server RAM

SKU CH-K4FZ-KAQ86

Eight 128 GB DDR4 2933 ECC LRDIMM modules deliver 1 TB of quad-rank server memory at 1.2 V

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 1TB (8 x 128GB)

  • 1TB server memory kit with eight 128GB modules for high-capacity workloads
  • DDR4 2933 MHz speed delivers fast data transfer rates
  • ECC LRDIMM technology detects and corrects memory errors
  • Load-reduced design lowers electrical load for dense configurations
  • CL21 latency at 1.2V provides efficient standard-voltage operation

1 TB DDR4 2933 ECC LRDIMM Kit

This kit provides one terabyte of DDR4 server memory across eight 128 GB modules. It is built for enterprise servers and workstations that require high-capacity, error-correcting load-reduced DIMMs. Desktop and laptop systems cannot use these modules.

DDR4 2933 LRDIMM limits

The DDR4 2933 interface tops out at this data rate, so throughput cannot exceed the PC4-23400 specification. Load-reduced architecture reduces electrical load on the memory bus, yet the quad-rank 4Rx4 organisation still limits the number of modules each channel can support. CAS latency is fixed at CL21 and voltage at 1.20 V.

Compatibility checklist

Confirm that your server or workstation motherboard accepts DDR4 288-pin LRDIMMs and supports 4Rx4 quad-rank modules at 2933 MHz. Verify the maximum DIMM capacity per slot and the total memory limit per processor. Check the manual for required population order and channel rules before ordering.

Kohokohdat

  • 1TB server memory kit with eight 128GB modules for high-capacity workloads
  • DDR4 2933 MHz speed delivers fast data transfer rates
  • ECC LRDIMM technology detects and corrects memory errors
  • Load-reduced design lowers electrical load for dense configurations
  • CL21 latency at 1.2V provides efficient standard-voltage operation

Tekniset tiedot

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 1TB (8x128GB) 4Rx4 PC4-2933Y-L
Part NumberNE-SS-0715
Capacity1TB (8 x 128GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4 / 4DRx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 1TB kit with eight 128GB modules or a different capacity for my server?

This kit provides 1TB total capacity using eight 128GB modules. Verify your server's maximum supported memory and available DIMM slots to confirm this configuration fits your requirements.

What does the DDR4 2933 speed rating mean for real-world server performance?

The modules run at 2933 MHz with CL21 latency, delivering PC4-23400 bandwidth. Actual throughput depends on your processor's memory controller, populated channels, and workload characteristics.

How does the LRDIMM interface affect maximum capacity and speed in practice?

Load Reduced DIMM technology buffers the data bus, allowing the quad-rank 4Rx4 design to operate at 2933 MHz without overloading the memory controller, enabling higher densities per channel.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.