Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 1TB (8x128GB) DDR4 2933 ECC LRDIMM 4Rx4 Server RAM

SKU CH-K4FZ-KAQ86

Eight 128 GB DDR4 2933 ECC LRDIMM modules deliver 1 TB of quad-rank server memory at 1.2 V

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCYes

Capacity 1TB (8 x 128GB)

  • 1TB server memory kit with eight 128GB modules for high-capacity workloads
  • DDR4 2933 MHz speed delivers fast data transfer rates
  • ECC LRDIMM technology detects and corrects memory errors
  • Load-reduced design lowers electrical load for dense configurations
  • CL21 latency at 1.2V provides efficient standard-voltage operation

1 TB DDR4 2933 ECC LRDIMM Kit

This kit provides one terabyte of DDR4 server memory across eight 128 GB modules. It is built for enterprise servers and workstations that require high-capacity, error-correcting load-reduced DIMMs. Desktop and laptop systems cannot use these modules.

DDR4 2933 LRDIMM limits

The DDR4 2933 interface tops out at this data rate, so throughput cannot exceed the PC4-23400 specification. Load-reduced architecture reduces electrical load on the memory bus, yet the quad-rank 4Rx4 organisation still limits the number of modules each channel can support. CAS latency is fixed at CL21 and voltage at 1.20 V.

Compatibility checklist

Confirm that your server or workstation motherboard accepts DDR4 288-pin LRDIMMs and supports 4Rx4 quad-rank modules at 2933 MHz. Verify the maximum DIMM capacity per slot and the total memory limit per processor. Check the manual for required population order and channel rules before ordering.

Pluspunten

  • 1TB server memory kit with eight 128GB modules for high-capacity workloads
  • DDR4 2933 MHz speed delivers fast data transfer rates
  • ECC LRDIMM technology detects and corrects memory errors
  • Load-reduced design lowers electrical load for dense configurations
  • CL21 latency at 1.2V provides efficient standard-voltage operation

Specificaties

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 1TB (8x128GB) 4Rx4 PC4-2933Y-L
Part NumberNE-SS-0715
Capacity1TB (8 x 128GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4 / 4DRx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Should I choose the 1TB kit with eight 128GB modules or a different capacity for my server?

This kit provides 1TB total capacity using eight 128GB modules. Verify your server's maximum supported memory and available DIMM slots to confirm this configuration fits your requirements.

What does the DDR4 2933 speed rating mean for real-world server performance?

The modules run at 2933 MHz with CL21 latency, delivering PC4-23400 bandwidth. Actual throughput depends on your processor's memory controller, populated channels, and workload characteristics.

How does the LRDIMM interface affect maximum capacity and speed in practice?

Load Reduced DIMM technology buffers the data bus, allowing the quad-rank 4Rx4 design to operate at 2933 MHz without overloading the memory controller, enabling higher densities per channel.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.