A-Tech 32GB (2x16GB) DDR3 1600 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM
- 32GB (2 x 16GB)
- DDR3 1600 (PC3 1280…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 32 GB dual-channel kit of DDR3 1333 MHz ECC registered server memory, 2×16 GB 2Rx4 modules at 1.5 V on 240-pin DIMMs
Capacity 32GB (2 x 16GB)
Speed DDR3 1333 (PC3 10600)
This 32GB kit contains two 16GB DDR3 1333 MHz modules built to the PC3-10600R standard. Each stick is a 240-pin registered DIMM with ECC, dual-rank x4 organisation and CL9 latency. The memory runs at the standard 1.5V DDR3 voltage and is intended for server and workstation platforms that require registered error-correcting memory.
These modules only fit systems designed for DDR3 registered ECC memory; they will not work in desktop or laptop computers. The dual-channel kit populates two slots and leaves remaining DIMM sockets free for further capacity expansion. Builders must verify their platform's qualified vendor list and follow the manual's channel-population rules before installation.
At the JEDEC-standard 1.5V the modules draw typical DDR3 registered DIMM power without elevated heat output. Passive airflow from a server chassis is normally sufficient; no additional cooling or high-wattage power supply headroom is required for the memory subsystem alone.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 16GB 2Rx4 PC3-10600R |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
At 1333 MHz (PC3-10600) with CL9 latency, this DDR3 kit delivers the rated throughput for platforms designed around that speed; sustained heavy loads will be limited by the bus frequency itself rather than the modules.
Each module operates at the standard 1.5 V DDR3 voltage; registered ECC DIMMs of this density typically draw a few watts per stick and run cool enough for normal server airflow without extra cooling.
The platform must accept DDR3 registered ECC DIMMs in a 240-pin slot, support dual-rank x4 organisation, and be a server or workstation class board — desktop and laptop systems are not compatible.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?