暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green 240-pin DDR3 RDIMM modules in anti-static bag

A-Tech

A-Tech 32GB (2x16GB) DDR3 1333 PC3-10600R ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM

SKU CH-6B54-KAR0W

A 32 GB dual-channel kit of DDR3 1333 MHz ECC registered server memory, 2×16 GB 2Rx4 modules at 1.5 V on 240-pin DIMMs

  • Capacity32GB (2 x 16GB)
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 32GB (2 x 16GB)

Speed DDR3 1333 (PC3 10600)

  • 32 GB dual-channel kit doubles server memory capacity
  • ECC registered design detects and corrects single-bit errors
  • DDR3 1333 MHz speed matches PC3-10600R specification
  • 2Rx4 dual-rank organisation increases memory density per module
  • 5 V standard DDR3 voltage ensures broad platform compatibility

32GB DDR3 ECC RDIMM kit for servers

This 32GB kit contains two 16GB DDR3 1333 MHz modules built to the PC3-10600R standard. Each stick is a 240-pin registered DIMM with ECC, dual-rank x4 organisation and CL9 latency. The memory runs at the standard 1.5V DDR3 voltage and is intended for server and workstation platforms that require registered error-correcting memory.

Registered DIMMs need a compatible server

These modules only fit systems designed for DDR3 registered ECC memory; they will not work in desktop or laptop computers. The dual-channel kit populates two slots and leaves remaining DIMM sockets free for further capacity expansion. Builders must verify their platform's qualified vendor list and follow the manual's channel-population rules before installation.

Standard 1.5V operation keeps thermals modest

At the JEDEC-standard 1.5V the modules draw typical DDR3 registered DIMM power without elevated heat output. Passive airflow from a server chassis is normally sufficient; no additional cooling or high-wattage power supply headroom is required for the memory subsystem alone.

特長

  • 32 GB dual-channel kit doubles server memory capacity
  • ECC registered design detects and corrects single-bit errors
  • DDR3 1333 MHz speed matches PC3-10600R specification
  • 2Rx4 dual-rank organisation increases memory density per module
  • 5 V standard DDR3 voltage ensures broad platform compatibility

仕様

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 16GB 2Rx4 PC3-10600R
Capacity32GB (2 x 16GB)
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 1333 MHz DDR3 speed become a bottleneck under sustained server workloads?

At 1333 MHz (PC3-10600) with CL9 latency, this DDR3 kit delivers the rated throughput for platforms designed around that speed; sustained heavy loads will be limited by the bus frequency itself rather than the modules.

How much heat and power do two 16 GB registered DIMMs draw when running all day?

Each module operates at the standard 1.5 V DDR3 voltage; registered ECC DIMMs of this density typically draw a few watts per stick and run cool enough for normal server airflow without extra cooling.

What server or workstation features must my system already support for this 2Rx4 ECC RDIMM kit to work?

The platform must accept DDR3 registered ECC DIMMs in a 240-pin slot, support dual-rank x4 organisation, and be a server or workstation class board — desktop and laptop systems are not compatible.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。