A-Tech 32GB (2x16GB) DDR3 1600 ECC RDIMM 2Rx4 1.5V 240-Pin Server RAM
- 32GB (2 x 16GB)
- DDR3 1600 (PC3 1280…
Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.
A-Tech
A 32 GB dual-channel kit of DDR3 1333 MHz ECC registered server memory, 2×16 GB 2Rx4 modules at 1.5 V on 240-pin DIMMs
Capacity 32GB (2 x 16GB)
Speed DDR3 1333 (PC3 10600)
This 32GB kit contains two 16GB DDR3 1333 MHz modules built to the PC3-10600R standard. Each stick is a 240-pin registered DIMM with ECC, dual-rank x4 organisation and CL9 latency. The memory runs at the standard 1.5V DDR3 voltage and is intended for server and workstation platforms that require registered error-correcting memory.
These modules only fit systems designed for DDR3 registered ECC memory; they will not work in desktop or laptop computers. The dual-channel kit populates two slots and leaves remaining DIMM sockets free for further capacity expansion. Builders must verify their platform's qualified vendor list and follow the manual's channel-population rules before installation.
At the JEDEC-standard 1.5V the modules draw typical DDR3 registered DIMM power without elevated heat output. Passive airflow from a server chassis is normally sufficient; no additional cooling or high-wattage power supply headroom is required for the memory subsystem alone.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 16GB 2Rx4 PC3-10600R |
| Capacity | 32GB (2 x 16GB) |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Ďalšie verzie tohto modelu
Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.
At 1333 MHz (PC3-10600) with CL9 latency, this DDR3 kit delivers the rated throughput for platforms designed around that speed; sustained heavy loads will be limited by the bus frequency itself rather than the modules.
Each module operates at the standard 1.5 V DDR3 voltage; registered ECC DIMMs of this density typically draw a few watts per stick and run cool enough for normal server airflow without extra cooling.
The platform must accept DDR3 registered ECC DIMMs in a 240-pin slot, support dual-rank x4 organisation, and be a server or workstation class board — desktop and laptop systems are not compatible.
Aj v tomto oddelení
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
Mena, v ktorej platíte, a mena, v ktorej sa zobrazujú ceny.
Odoslané z vašej peňaženky na pokladni
Len na zobrazenie — katalóg je uvedený v dolároch
Žiadna mena nezodpovedá.
Vyberte jazyk, v ktorom s vami bude web komunikovať.
Žiadny jazyk nezodpovedá.
Ste tu prvýkrát?
Účet už máte?
Automatický reset hesla neexistuje: tento obchod neposiela žiadne e-maily, takže neexistuje jednorazový odkaz, o ktorý by ste mohli požiadať. Nechajte adresu na účte — niekto sa jej ujme ručne.
Žiadosť zaznamenaná
Do vašej schránky nič nepríde — tento obchod neposiela vôbec žiadne e-maily. Niekto sa o to postará ručne.
Spomenuli ste si?