A-Tech 2GB DDR2 400MHz SODIMM PC2-3200 CL3 1.8V 200-Pin laptop RAM
- 2GB
- 200-Pin DDR2 SO-DIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 4 GB dual-channel DDR2 SODIMM kit running at 800 MHz with CL6 timing and 1.8 V for older laptops
Capacity 4GB (2 x 2GB)
Speed DDR2 800 (PC2 6400)
This 4 GB kit contains two 2 GB DDR2 800 MHz modules built to the PC2-6400 standard with CL6 latency. They use the 200-pin SO-DIMM form factor and run at the standard 1.8 V. The kit targets owners of DDR2-era laptops, notebooks or all-in-one systems that need a straightforward memory upgrade.
Operating at the JEDEC-defined 1.8 V keeps heat output modest and power draw low during normal workloads. The unbuffered, non-ECC design adds no extra active circuitry, so the modules run quietly without requiring additional cooling beyond the laptop's existing airflow.
The matched pair enables dual-channel operation on compatible platforms, delivering the bandwidth uplift that comes from interleaved access. No extra software or drivers are included; the benefit comes purely from the hardware configuration. Buyers who need ECC, registered modules or a different DDR generation should look elsewhere.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR2 Laptop Memory RAM |
| Capacity | 4GB (2 x 2GB) |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Voltage | 1.80V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| Recommend Use | AMD & Intel Compatible |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Power off the laptop, remove the battery if accessible, open the memory door, align the notch on each 200-pin module with the slot key, press firmly until both side clips click, then replace the door and battery before booting.
No scheduled maintenance is required; keep the laptop vents clear so the modules stay cool, and replace the kit only if a memory test reports errors or the system fails to boot with both modules installed.
The DDR2 800MHz bandwidth ceiling is reached before latency becomes a bottleneck, so prolonged heavy workloads will hit the 6400 MB/s transfer limit of the PC2-6400 specification first.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?