暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

A-Tech

A-Tech 4GB (2x2GB) DDR2 800MHz SODIMM PC2-6400 CL6 1.8V 200-Pin Laptop RAM

SKU CH-HZ7V-HJMA7

A 4 GB dual-channel DDR2 SODIMM kit running at 800 MHz with CL6 timing and 1.8 V for older laptops

  • Capacity4GB (2 x 2GB)
  • Type200-Pin DDR2 SO-DIMM
  • SpeedDDR2 800 (PC2 6400)
  • CAS LatencyCL6
  • Voltage1.80V
  • ECCNo

Capacity 4GB (2 x 2GB)

Speed DDR2 800 (PC2 6400)

CAS Latency CL6

  • 4GB dual-channel kit expands system memory for smoother multitasking
  • DDR2 800MHz speed accelerates data transfer and application loading
  • CL6 latency at 1.8V ensures responsive performance with standard power
  • 200-pin SO-DIMM form factor fits compatible laptop memory slots
  • Rigorously tested modules deliver reliable operation for DDR2 systems

DDR2 SODIMM kit for older laptops

This 4 GB kit contains two 2 GB DDR2 800 MHz modules built to the PC2-6400 standard with CL6 latency. They use the 200-pin SO-DIMM form factor and run at the standard 1.8 V. The kit targets owners of DDR2-era laptops, notebooks or all-in-one systems that need a straightforward memory upgrade.

Low-voltage DDR2 thermals and power

Operating at the JEDEC-defined 1.8 V keeps heat output modest and power draw low during normal workloads. The unbuffered, non-ECC design adds no extra active circuitry, so the modules run quietly without requiring additional cooling beyond the laptop's existing airflow.

Dual-channel kit simplifies installation

The matched pair enables dual-channel operation on compatible platforms, delivering the bandwidth uplift that comes from interleaved access. No extra software or drivers are included; the benefit comes purely from the hardware configuration. Buyers who need ECC, registered modules or a different DDR generation should look elsewhere.

特長

  • 4GB dual-channel kit expands system memory for smoother multitasking
  • DDR2 800MHz speed accelerates data transfer and application loading
  • CL6 latency at 1.8V ensures responsive performance with standard power
  • 200-pin SO-DIMM form factor fits compatible laptop memory slots
  • Rigorously tested modules deliver reliable operation for DDR2 systems

仕様

BrandA-Tech
SeriesA-Tech DDR2 Laptop Memory RAM
Capacity4GB (2 x 2GB)
Type200-Pin DDR2 SO-DIMM
SpeedDDR2 800 (PC2 6400)
CAS LatencyCL6
Voltage1.80V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
Recommend UseAMD & Intel Compatible

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How do I install the 200-pin DDR2 SODIMM modules and what step is often missed?

Power off the laptop, remove the battery if accessible, open the memory door, align the notch on each 200-pin module with the slot key, press firmly until both side clips click, then replace the door and battery before booting.

What maintenance or replacement will the CL6 1.8V DDR2 kit need later?

No scheduled maintenance is required; keep the laptop vents clear so the modules stay cool, and replace the kit only if a memory test reports errors or the system fails to boot with both modules installed.

What limit appears first under sustained load with the PC2-6400 800MHz dual-channel kit?

The DDR2 800MHz bandwidth ceiling is reached before latency becomes a bottleneck, so prolonged heavy workloads will hit the 6400 MB/s transfer limit of the PC2-6400 specification first.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。