A-Tech 4GB DDR3L 1600 ECC UDIMM 1Rx8 1.35V Server RAM
- 4GB
- DDR3L 1600 (PC3L 12…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
4GB DDR4 ECC registered DIMM running at 2133 MHz with CL15 latency for servers and workstations
Capacity 4GB
This 4GB DDR4 2133 ECC registered DIMM is built for servers and workstations that require error-correcting memory. It operates at 1.2V with a CAS latency of 15 and uses a single-rank x8 organisation. The module is not compatible with standard desktop or laptop computers.
The jump is worth it when your workload demands data integrity through ECC and the platform requires registered DIMMs. Adding this module increases the memory pool for virtualisation, database or compute tasks where single-bit error correction prevents silent data corruption. Systems that only accept unbuffered memory cannot use this module.
Align the notch on the 288-pin module with the slot key, press firmly until the retention clips lock, and follow the system manual for channel population rules. Common issues include mixing registered and unbuffered DIMMs, exceeding the maximum rank count per channel, or installing in unsupported desktop boards that physically accept the module but will not POST.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 4GB 1Rx8 PC4-2133P-R |
| Part Number | AT4G1D4D2133RS8N12V |
| Capacity | 4GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Single Module |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The module uses the standard 288-pin DDR4 DIMM form factor and 1.2 V voltage, so it fits any server or workstation slot designed for DDR4 registered ECC memory.
Install the module in the slot order shown in your system manual; the common mistake is placing a single module in the wrong channel, which can prevent the server from posting.
ECC corrects single-bit errors automatically; if your system logs show uncorrectable errors or repeated correctable-error thresholds being exceeded, plan a replacement.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?