A-Tech 4GB DDR3 1866 ECC UDIMM 1Rx8 1.5V CL13 240-Pin Server RAM
- 4GB
- DDR3 1866 (PC3 1490…
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
A-Tech
A 4 GB DDR4 2400 ECC registered module with CL17 latency and 1.2 V operation for server and workstation upgrades
Capacity 4GB
This A-Tech module delivers 4GB of DDR4 2400 registered ECC memory in a single 288-pin DIMM. It is built for servers and workstations that require error-correcting registered RAM. The single-rank x8 organisation runs at 1.2V with CL17 latency. It is not compatible with desktop or laptop computers.
Before ordering confirm that your system accepts DDR4 2400 registered ECC DIMMs and supports single-rank x8 modules. Check the motherboard or server manual for approved memory configurations and population rules. The module will not function in platforms that require unbuffered non-ECC memory or a different DDR generation.
Adding this module increases usable memory for multi-threaded workloads and enables ECC protection for data integrity. The jump is worthwhile when your current configuration lacks error correction or has insufficient capacity for virtualisation or database tasks. Ensure the platform can address the additional rank and speed before installing.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 4GB 1Rx8 PC4-2400T-R |
| Part Number | AT4G1D4D2400RS8N12V |
| Capacity | 4GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Single Module |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The box contains one 4 GB DDR4 2400 ECC RDIMM module. No cables or brackets are included; you only need a compatible DDR4 server or workstation with a free 288-pin RDIMM slot.
This is a single 4 GB 1Rx8 module. Select it when your system requires a single-rank registered DIMM at 2400 MHz; choose a higher-capacity or dual-rank module only if your platform supports it and you need more memory per slot.
The module will run at up to 2400 MHz with CL17 latency at 1.20 V, provided the server's memory controller supports that speed and the DIMM is seated in a supported channel configuration.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?