We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green bare circuit board with black chips and gold edge contacts

A-Tech

A-Tech 4GB DDR4 2400 ECC RDIMM 1Rx8 CL17 1.2V server RAM

SKU CH-892B-7WBPE

A 4 GB DDR4 2400 ECC registered module with CL17 latency and 1.2 V operation for server and workstation upgrades

  • Capacity4GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes

Capacity 4GB

  • ECC protection prevents data corruption in server workloads
  • Registered buffering stabilises signals for reliable 2400 MHz operation
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • Standard 1.2 V DDR4 voltage reduces power draw per module
  • 288-pin DIMM form factor fits DDR4 server and workstation slots

Server DDR4 ECC RDIMM module

This A-Tech module delivers 4GB of DDR4 2400 registered ECC memory in a single 288-pin DIMM. It is built for servers and workstations that require error-correcting registered RAM. The single-rank x8 organisation runs at 1.2V with CL17 latency. It is not compatible with desktop or laptop computers.

Verify platform support for registered ECC DDR4

Before ordering confirm that your system accepts DDR4 2400 registered ECC DIMMs and supports single-rank x8 modules. Check the motherboard or server manual for approved memory configurations and population rules. The module will not function in platforms that require unbuffered non-ECC memory or a different DDR generation.

Upgrade from lower capacity or non-ECC DDR4

Adding this module increases usable memory for multi-threaded workloads and enables ECC protection for data integrity. The jump is worthwhile when your current configuration lacks error correction or has insufficient capacity for virtualisation or database tasks. Ensure the platform can address the additional rank and speed before installing.

Highlights

  • ECC protection prevents data corruption in server workloads
  • Registered buffering stabilises signals for reliable 2400 MHz operation
  • Single-rank 1Rx8 layout simplifies memory-channel population
  • Standard 1.2 V DDR4 voltage reduces power draw per module
  • 288-pin DIMM form factor fits DDR4 server and workstation slots

Specifications

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2400T-R
Part NumberAT4G1D4D2400RS8N12V
Capacity4GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitSingle Module
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box and what else do I need to buy?

The box contains one 4 GB DDR4 2400 ECC RDIMM module. No cables or brackets are included; you only need a compatible DDR4 server or workstation with a free 288-pin RDIMM slot.

Should I choose a different capacity or rank for my server?

This is a single 4 GB 1Rx8 module. Select it when your system requires a single-rank registered DIMM at 2400 MHz; choose a higher-capacity or dual-rank module only if your platform supports it and you need more memory per slot.

What does the 2400 MHz rating mean once the module is installed?

The module will run at up to 2400 MHz with CL17 latency at 1.20 V, provided the server's memory controller supports that speed and the DIMM is seated in a supported channel configuration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.